Search results

hi, have been trying to set up a tv upstairs, i managed to get a good signal but moved the aeriel just a fraction and lost the reception completely and couldnt get it back, i eventually got a signal but only got channels to do with the bbc, i have since bought a tv aeriel signal finder but only...

cant see what is leaking but have a feeling its a coupling doesnt always leak just occasionly

Hi, i recently installed a new shower tray and have noticed sometimes that there is a small leak in the drainage which drips in to my downstairs bathroom, if i have to i will lift it all out and fix it that way But i have seen some things in some shops that stops leaks in a radiator system by...

turned all other rads down, but one of them doesnt have a TRV or a plastic c ap on to indicate which is flow or return, how do i find out what one is flow?

lock shields are open, dont know if the pipework under the floor is plastic but the pipes connecting to the radiators are copper if it was a blockage would that not prevent the water getting to the radiators? they are filling up as it was a brand new radiator i also installed so know it was...

Hi, i have 2 radiators in my system not working! Thought it might have been a faulty TRV so changed the TRV but still the radiators are still not warming up!! When i bleed the radiators in question water does escape so water does get to them!! Have also tried adjusting the pump speed...

thanks for the advice heard someone talking about an aqua vac once? is this any good? cheers

hi been doing some soldering on some pipes in my bathroom i shut off the water coming into the house, stopped the water that goes into the hot water tank, also drained the cwsc (have now fitted isolating valve to cwsc) so no need to drain the whole system but i still had water trickling...

hi where on my CH/HW system do i fit a 3 port mid position valve? thanks

that is how my set up looks not aware of any other actuators, wouldnt know where to look, but i think you have solved my problem, the system will be getting replaced by the end of the year so hopefully will get it made right with the new system thanks for all your help cheers

no that is the white pipe in the second pic that goes into the walls to what i believe will be the central heating

hope this paints a better picture i have nothing that looks like the one in your picture, what i have is pump and actuator, on the actuator there is a needle with 3 settings, middle CH/HW, top HW, bottom CH pipe going into actuator note white pump branches left behind actuator then...

it was the cylinder thermostat i changed which is on the side of the tank the valve on the actuator is set in the middle for both CH/HW it has individual settings above and below 1 for CH and 1 for HW

there is a pin on the actuator and it is set in the middle the red and black wires came from randall 3