Search results

Thanks for the reply.

Hi There, A friend of mine is wanting to fit a new shower RCD, but where it can be located makes the shower cable about a foot or so too short. Is it safe or indeed legal to fit a junction box to extend said cable. Thanks.

Thanks!

Sorry my mistake with the Terminolagy, it is a cable outlet plate not a socket, So would it be ok to wire the oven into the Cable outlet and drill an hole through the worktop put a plug on the Hob cable and plug it into the Cooker Control Unit's 13 amp socket? Thanks

I had a look and it says Hob 100W and the oven 4000w 40A, any help?

Not really, it was a proper cooker socket with a 30 amp fuse using at least 6 mil cable.

The Hob is just for the ignition, it's an electric fan assisted oven dont know the power of the Oven at this moment but i will look for later.

Hi There, I wired an Electric Oven and a Gas Hob into the same socket under the worktop, which comes from one of those big Cooker Switces with a big red switch for the said socket and a 13 amp plug socket, now the Corgi man said it was against the Regs to do this, but he said i could put a plug...

Thanks for your reply's, i've arranged for my leccy company to come and change to meter to a billing one, so if i talk nicely to the spark he might do it for me and check the tails to see if there big enough. Thanks.

There are 9 light fittings including 2 wall lights, the other fuses are for 15A Water Heater, 30A Sockets and 30A Cooker(Oven).

Just wondered if it was big enough for the job, because the other fuses add upto 80 and then there's 40+amps for the shower,

Hi There I'm about to fit a 8.5 kw shower (using 10mm2), at the moment i have a wired fuse Wylex(1x5a, 1x15a and 2x30a) i'm undecided at the moment whether to change the CU or fit a shower RCD (via a Henly) theres no problems pulling the service fuse as its a token meter, i'll wait till it...