Search results

Hello all, I have two Salamander CT50 1.5 bar shower pumps installed in my loft for the main bathroom shower and ensuite. My system is vented and the distance between the bottom of the cold water tank in the loft and the shower heads is around the 600mm mark, probably a little less. The pumps...

Hello all, I have moved into a flat with a Smeg integrated fridge freezer. The problem is the fridge is "warm" (according to an independent thermometer) Freezer is fine and the compressor does kick in when cooling is required. Regardless of the position of the stat the temperature does not...

-------------------------------------------------------------------------------- Would anyone know if Conrad electronics FS20 units are interchangeable with Housetech HH units? Regards

All, The original install of my bypass system on the central heating is in 15mm branched off the 22mm with a standard gate valve. Do I fit a 15mm auto bypass. Do I rip it out and fit 22mm pipe and auto bypass. Or install a wilo smart pump which I believe does not require a bypass, my...

All, I will be replacing my old oil boiler with an oil condensing unit. Any advice on makes would be appreciated. Would a condensing combi boiler be worth considering?

Hello All, I recently raised the issue of replacing my ten year old Boulter 50/70 classic oil fired boiler and was told that I could expect annual savings of around 10-15%. The boiler has been serviced every year and I am wondering if looking at the central heating in sections would make...

All, I have a ten year old Boulter 50/70 classic oil fired boiler. I am considering replacing it with a new "A" rated condensing boiler. Efficiency of the Boulter is listed as 85% and the condensing boilers up to 97% Would anyone have any comments on the expected annual fuel savings??

Would the direction of water flow from a pump in a system have any effect if it was incorrect? I am having problems with my radiators becoming warm when hot water is only selected. It cannot be the diverter actuators on the danfoss valves as I have replaced these. It cannot be the valve...