Search results

  1. O

    Power shower v. Megaflo mains pressure cylinder shower

    you do not have to have a megaflow there are other units that do the same job and at a much better price. At least with a unvented cylinder you will have mains pressure on all hot taps including the kitchen. see link below for a wide selection and they all come with a 25 year guarantee...
  2. O

    Belmont O-ring substitute

    I used to work for a plumbers merchants that used to supply them they were either red or green and yes they are expensive. we used to get them from a company called the Beck CO. in England. I used to work for plumbase so you could try them.
  3. O

    shower cubicle bi fold door

    Most shower doors have around 20mm adjustment maybe more if you check the manufacturers spec's you will find one to do the job. companies Like Matrix bathrooms even supply wider profiles to do the job but there is a lot of choice out there. you could try www.heatandplumb.com as they...
  4. O

    Partial passovers

    You can but these from any good plumbers merchants and the bend will be much tighter than anything that you could make yourself.
  5. O

    programable room stats

    Which combi boiler do you have because a lot of the manufacturers now offer a programable stat that can be fitted in to the boiler. Most of the are also radio frequency so the stat can be sited any where in the house. These stats have a sender and a receiver the receiver is plugged into the...
  6. O

    Central heating on two circuits

    Yes you can zone your heating, You will need to have 2 room stats and 2 zone valves, one for upstairs and one for downstairs and a 3channel programe 1 channel for the hot water and the other 2 for the heating. The Horstman H37xl is a good one. See link below for spec...
  7. O

    Megaflow

    There are quite a few options on the market instead of the megaflo you have the likes of OSO, Keston, Santon which are at the more expensive end or you can have the Gledhill,range tribune, Ariston and there are many more. I have sold most of these over the years and have found that Gledhill...
  8. O

    How not to get ripped off?

    I would recomend going to your local merchant Like Plumbcenter or Plumbase ETc, I have worked in the merchants for over 20 years and when ever anyone asked if I could recomend someone I would always give them a few names of plumbers that I would have in my house. And to never take the...
  9. O

    Am I about to be ripped off? Ravenheat parts price query

    Unfortunately when the boiler is inexpensive the manufacturer has to make the money elsewhere so they do this when at a later date you require boiler spares.
  10. O

    Calculating radiator size

    I have found a btu calculator see link below http://www.heatandplumb.com/radCalcs.html it was on the heatandplumb.com website regards Phil
Back
Top