Search results

Hmmm, thanks for that thought. Before I rush out and by a new momobloc tap, is it feasable to disconnect the connecting studs and repack the threaded hole with sealant before re-inserting the studs :?: :? Just an :idea: Thanks for your help.

I have a similar problem but the leak appears to be coming from the connecting studs that hold the tap to the basin. Initially I assumed the leak was from the 10mm flexi tails but reassembling them (after checking for damaged o-rings) I ruled this out. But I could be mistaken? The leak...

Thanks for response Guys. (1) There is no tank; (2) The Vokera combi (Excell 80SP) has a 23.7kw max heating output. The thermostatic valves specifications confirm that it is (a) suitable for unequal pressure; (b) minimum of 1 bar and maximum of 5 bar pressure operation and (c) suitable...

Question: the original bath cold water supply (mains pressure) is 22mm but the hot water supply is 15mm should both be 15mm or both 22mm :?: If not why not - balance/flow issues :?: I have a Vokera combi boiler. I'm intending to fit a "Hudson" type thermostatic valve (wall mounted) to...

Many thanks - spot on! Quite a lot of "debris" had accumulated preventing the assembly from being extracted. Will pay attention to this in future :oops: Now all fixed - again, grateful for your input. 8)

Our W/M stopped emptying and spinning. I've managed to download the manual for the AEG Lavamat 74335 W/M. The diagram doesn't make it clear when accessing the filter/pump (lower right front of W/M) whether only the cover screws off or whether more of the assembly should be extracted from...