Search results

Ok Ill try that Thanks shambolic for your advice and words of wisdom

No. How would I do that? and what would that prove? Cheers

Seem to be getting an excessive amount of air in two radiators, need bleeding every couple of weeks. Boiler is two years old and a Worcester combi. Any ideas?? Didn't have an air issue before.

gasguru are you sure hobs can be installed with a flexible hose?

Hi I am gas safe registered, but cant access combustion chamber as DIY not wont allow me ( i've applied twice) long storey

Has anybody come across a problem with a baxi Solo 3 continually sooting up on the right hand side of heat exchanger. Changed pilot burner and injector but it still soots up. Any advice is appreciated

i'm fairly certain that back boiler unit is electronic and works through a pcb. So no pilot to light but needs attention

most parts will be standard on that boiler. Does the pilot stay alight??

My extension roof (tiled) is too shallow and during heavy rain water comes through a extractor fan tile where felt has been cut. Apart from re building the roof is there a sealant i can use to run along the tiles?? Bit of a bodge but might do the trick.

Worcester 9.24, must be nearly 20 years old and done its time. i would guess parts obsolete as well. I'd recommend Worcester 34 Cdi classic with a 5 year warranty.

Not sure this is the right area of this site, but I,ll ask anyway. The water softener continually overflows any suggestions

Many years ago i had an extension fitted with Fortecrete (?) tiles fitted and to gain lenght the builder made it to shallow. I had always had water entry in bad rain. Had a roofer look at it and he was able to put a sealant on tiles to stop water getting under tiles. At the time he said this is...

Try showerdoc.com really helpful send them a picture and they can usually identify and supply the part

good idea. helps to reduce expansion noises

do you mean a hot water return for pumped domestic water?

Hoping to repaint daughters bedroom walls but the are blutac marks on walls. Can I just paint over them or will they need some treatment. Any advice??

Try showerdoc.com Very helpful

it looks like an expansion vessel so i think you need a plumber to replace it

Can anybody help with a web site address to help me identify a shower unit (built in) that needs a replacement cartridge

Air pressure switch hasnt totally failed but works untill it switched off and moves to normally closed circuit but doesnt return to normally open circuit to restart the boiler.