Search results

That's a good idea I tried to unplug that because it was in the way I'm at work but will look at that when I get home :) what is it for ? Would I be able to hear the boiler tryIng to ignite if that was dodgy ?

I'll give you the full run down in December my boiler stopped working correctly the actuator on the diverter valve wasn't working upon inspection I found this was because the valve had been leaking which caused the actuator to fail which in turn caused the Pcb to fail I replaced the actuator and...

hi my f1 fault has reared its head again you mentioned this could be the gas solenoid do you know if its possible to just replaced the solenoid or weathyer it will need a full new gas valve or if there is any way of testing it to confirm that it is this at fault ? thanks for your help

the boiler sounds alright just when its on a low heat it get to the temp the cuts off alot quicker

i set the temp setting on the boiler to full it took about 15 mins for the boiler to get to temp and the radiators were hot maybe all this is just in my head and its working as it should does that sound about right to you and thanks for the advice by the way its really appriciated

hi the f1 fault seems to of dissapeared for now it was only comiong on in a morning when the boiler was striking up after not running for a while. i still have the heating issue what its doing is getting to the temperature setting set on the boiler and cutting out so its working as it should...

hi new to this forum and im hoping some one can point me in the right direcdtion i have a glow worm 30ci thats giving me 2 problems the first is that after the boiler has been off for a while and goes to strike up i get an F1 fault after one or two power downs the boiler will run fine all day...