Search results

Hi Guys, I wanted to update the progress of this issue. I ordered the heater element from ebay, it costed £43 total price with 1 year warranty. It arrived on 2 days but I only could work today. I dismounted the old one, I cleaned thoroughly the pump and installed the new one. I double checked...

Yardie I didn't get the multimeter to move at all, I tried within the socket, outside the socket on the metal legs arriving to the socket, I tried at the other side of the legs where they meet the needles coming from the heater. Since it was my first time using a multimeter, I dismounted the...

Thanks again, I think this is the way to go. I checked the heater element and no resistance at all. I will proceed tomorrow to order it though not sure if it is worth trying to get the 5 year part-warranty from Indesit. I bought this one in 2013 :shock:

Hey guys thanks, I will get it down and test it then. I found a video in you tube for IDF 125 with same fault. http://parts.indesit.co.uk/shop/spare-parts/dishwashers/idf125-s-uk/p/F060258?q=IDF125:name-asc:elettrodomestico:F060258:endCategories:C8-RIC-LVSGL-HTELE

I already removed front panel, nothing weird was found, I put i back on. I removed top and left panels. I know for sure both waste and intake water hoses are fine as I checked them yesterday. I selected the soaking cycle and it finished. I saw the water coming normally. The left hand side...

The option I have seen so far is to push the on/off button until is off completely. I haven't found another way in the manual. After it goes off for about 1 hour and then other hour blinking both buttons. I will remove tomorrow the front panel and check for any fault there.

Well yes, the only way to stop the flashing lights is by powering off the main socket. How to verify that the problem is the main control board?

I mean I turned off from the on/off button, I have turned the power socket on/off also and the machine remains blinking both buttons, I push/hold on/off button again and the flashing come back again. Where is the heating element?

This is what the DW does though it is turned off. It has been like that the whole night. It is just flashing without draining. This is the water level during the rinse part of the cycle. It is overfilled? I have no idea as I never checked the levels, can you tell from the photos?

Water levels

Flashing lights when turned off

Thanks Yardi for replying, I did as you said. 1. I poured the water on tub and without turning on DW and starting cycle, the DW drained the water. However, I tuned it on and started cycle, the drain continued but the remained blinking middle -bottom and start buttons. 2. I turned it off...

Hi have an Indesit IDF 125 dishwasher that started misbehaving after two power drops. The cycle starts, rinses and drains first time. It doesn't open the detergent cup, and never goes in to further steps. It remains flashing the "Start" button light and then goes off after 1 hour so. When left...

Thanks all for your replies. Yes, I have no experience with electricity and I thought it could be a simple DIY job. Can I function the hood as a plugged appliance to any of the existing sockets? Any suggestions where to a find a certified electrician? Thanks Harvy

Hi, I am installing a cooker hood and the manufacturer requires to connect it fixed to a 3A DP Spur. My options for this are: 1. Connect it to Junction Box that has the In from the mains and Out to the cooker. 2. After this there are 2 JB around the boiler. One JB supplies to a...