Search results

My house has a gravity fed vented hot water which is pumped via a 2bar pump to the shower. The shower is fine but the rest of the house is rather poor. So what I was thinking was to either change the whole system to an unvented cylinder which involves rather a lot of work or install a whole...

Another problem i have discovered. I have not got a static IP address so i can only log in to my account for a short time or pay for a static IP address. More money :(

Thank you Hoover for all your help, hopefully i will not have to bother you again. Thanks Philip

The strangest thing happened this morning, I forgot to switch the alarm off & opened the back door so setting off the alarm. However, within a minute I got a text message from Vodafone telling me that the alarm had gone off with the right zone everything. Now I am back & tried to do a test...

It has the 10 pins that plugged straight into the top of the control panel board & has 2 ports one for com 1 & the other audio.

The modem is brand new out of the box, I phoned my home line & on the second attempt, I think the modem kicked in as the phone line started to beep.

I thought I would make sure the problem did not lie with the phone wiring, so I have rewired the internal phone line to get rid of all the filters & the ADSL sharing the phone line. Therefore, I have changed the front of the master phone socket for one with a built in filter & separate ADSL line...

Right I had a look on the keyboard for the test call and the following happened: Initialising...... Please Wait.... Then Com3 Resetting.... Com3 Idle............. Then Com1 Resetting.... Com1 Idle............. Then Com3 Resetting.... Com3 Idle............. Then Com1 Resetting...

Sorry The screen shot showed the protocol option ticked on area account but I must of ticked it by mistake when I was taking the screen shot, but was never uploaded to the panel. The com 2400 is connected to a phone extension socket which is fitted with a filter. The com 2400 is connected...

Tried it, but still nothing I have attached the wintex pages maybe it is obvious what i have done wrong.

Both ARC 1 & 2 are set to my mobile number, with sms messaging protocol.

Hi I have just installed a texecom Elite 48 system with a Com 2400 for receiving sms messages & a Com IP for accessing it via the internet/ mobile app, but I am having problems. The first is that the com 2400 will not text my mobile all it will do is ring my mobile, bt have said that my line...