Search results

I do not know if they are cheaper, but today I visited one of my friend and whyle I was there my friend had a surveyor from one of ECO4 grant scheme , and the surveyor told my friend that the scheme is only to replace and supply cobi boiler only and not system boiler, but survyor was not too...

Is it possible to install a combi in place of a system boiler by doing some necessary changes (plumbing or electrics) and still keeping the Megaflow, Just curious

So , shall i remove this elbow valve and replace it with a one with a pressure guage attaced to it " the proper one 175528 ", I double checked and can not trace a pressure guage attached to the system. Do this flow valve comes with a new boiler or purchased separatly?

There is the flow pipe but not pressure gauge Photo was taken upside down

Hello there My daughter just purchased a house and she had a plumber to replace 2 radiators After bleeding system and radiator fitted, plumber couldn’t find pressure gauge on the system Here are some photos . Ideal es38 combi Any suggestions

Thank you , so this is for the upper element or upper and lower are the same

I have an old type CL210 Heatrea Sadia with only bottom element fitted and a blank insert on the upper position. The part has been ordered according to HS 95606964 but when the enginner come to fit the elemnt said that the brass boss with the new element is different from the bottom one...

How long can I keep the fernox F3 express inside the system Does it need flush out?

Fixed The engineer ingected fernox F3 Express and all in working order now. My question is how long can I keep thernox inside the system, do I empty it and let refill till I get clear watr out or will it need to power flush it?

No,...out of warranty

Sorry , Combi Plus HE M296.24sm/c

Just had visit this morning by the beasi engineer to solve the above problem. I thoght he was going traght away to replace the heater exchanger, but he recon that if he put some chemicals to the heating system might solve the problem. If not he said we need to flash the all system, if so he...

Yes, I only relised this today That I used 4 core phone wire and I'm unable to replace it due to plasterboard and timber on the new ceiling detector. Original cable on the expander are yellow and blue and the new one comming from new detector are r/w and bl/w

new detector goes to expander 1 zone 15 and there connected on serie

Just forgot to mention that it has already a detector installed for the last 5 years. Yes it is a 24 zone Premier elite and all zones are used. So do I still do as you advise by removing the 4K7 and connect in series to the existing detector. Below is photo of the existing detector wired.

Can someone please assist if possible to connect 2 Exodus smoke alarm can be connected in series on the same zone , see attached photo and have used the same configuration as per bottom of photo and I get tamper fault ? Thank you

Yes it’s a large house build in 2002 and plumbing done professionally at that same time. So the purpose of that pump is to get instant hot water ....yes. Because each boiler has got their own circulating pumps Thank you

Circulating pump just for hot water ?

Hello and good morning, hope someone can or knows what this pump on my system do and how, please look the enclosed photos The plumbing on my house has been done around 2002 , it has 2 conventional Alpha boiler next to each other ,I have no problems at all for now with the system. What puzle...