Search results

Any ideas why?

Actually I’ve just measured the joists they put in they are 1.5 x 3”

More

Agreed with the loft guys I wanted floor separated from the ceiling, and I also questioned the used of 4x2 when they came as I want the loft as a kind of light use cardio gym, rower, bike etc, not jumping around on a treadmill. So this is what they’ve done. Cross braced our 3x2 ceiling joists...

So it’s a simple job to DIY?

The boiler has thrown up F26 for a few years now, a simple reset & top up usually sorts it out, except now, after a long summer, it is being stubborn, and also showing up F03. We DO have hot water WE DON'T have heating Am I right in thinking the diverter value is knackered? I can source one...

Hi, we want to change our old thermo to enable us to control via Wi-Fi. Current one is an old analogue Honeywell with 2 wires, brown & blue. I see loads available on Amazon, but is there anything specific I’m looking for with just the 2 wires? Hopefully the pics are attached.

Hi, I was wondering if I can switch this for a more modern thermostat we can either time, or remotely control via wifi or whatever, without going whole hog. Just a simple upgrade on the current one where were nobody wants to leave their bed to turn the fecking thing on at 5am.

Thanks for the reply. It is a similar shower and the manufacturer recommends this as a replacement, along with someone here. I'm replacing a Gainsborough 8.5kw Style 400x, with a Gainsborough SE 8.5kw.

Before I hook this back up in just wanted to check where the spare earth goes. I know how to wire the 3 that are together, but where does the lone earth go ? I assume it is where the other earth goes right ? Thanks

Cheers. Do you know if this one has the same fittings?

Have and old electric shower. A Gainsborough Style 400x. As title says, I start it, it is hot for a split second, and then goes luke warm. Turning to the cold will make it go then usual cold. Tap hot water & CH fine Any ideas? Can I DIY it? Thanks

Recommend stitch/chain drilling it then? Anybody done this before?

The is the hole.

Could I not use the few inches of filling from the inside of the hole for this? How far in do you have to use the pilot?

There are 3 holes in a room I have, all at 100mm wide. Rather than cut a fresh hole at 150mm, I thought it would be best to expand 1 of the current holes, so as not to look a complete eyesore from the outside. On the inside, you would never know they were there, but on the outside, they still...

The dryer belt broke the other day. The mrs just unplugged it ready for me to fit the new one and she noticed the neutral on the extension, and the dryer plug has started to melt. Digging around the net I have learned you should not really be using an extension with a dryer. 2 questions I...