Search results

Hi A few months ago my ideal Icos front panel started flickering and the boiler would not work unless I put pressure on the front of the boiler. I had an engineer take a look and he replaced the board which didn't work but when the old board was replaced the boiler started to work normally...

Thanks for the reply. I didn't think 25mm was enough. Is there an under screed foil available that would take the floor upto regs? What about the slope of the floor do you think it would notice with rigid boards layed on it? I was thinking that the plaster board option might save some space...

I also have a 2 car driveway but in some cases the highways department have demanded a third!!

Hi all From what I can see in the garage(I haven't knocked through yet) the floor in the house is about 60mm higher than the garage. Although what I can see (which is wrapped in a dpm) may not be the top layer I suppose. I've checked with planning and I do need permission due to parking I...

The property is 4 years old. I take your point about the floor being able to withstand the weight of a car, ill mention that to planning. How tough is the insulation if you can lay chipboard straight ontop? If I was to use celotex or kingspan what are the model numbers of the boards. Ta

Hi Yes it will be filled in with a few courses of bricks and a window. I think the difference in floor height is around 100mm. I will measure exactly and post. The chipboard on insulation baffles me slightly, I can't imagine the insulation standing the test of time, although I haven't seen...

Hi I am about to convert my garage to a room and have a few questions. When I have the garage opening bricked up will I need to dig a foundation? From what I can see the garage floor is made from the same slab as the rest of the house (although slightly lower). Is this slab suitable to...

I'll use the feed from the hall radiator for the garage radiator and try the hallway without a rad. Thanks forthe reply

Hi Thanks for the reply. The pipes look like 10mm to me and the garage is 5m x 3m. The reason I suggested using the kitchen rad for the feed is that the new hall rad would be mounted on the other side of the wall so there would be no pipes showing. If I was to use the feed from the original...

Hi all I'm planning a garage conversion and have a small radiator in my hallway which is where the door into the garage will be. My idea was to use the feed for this rad to supply the new rad in my garage, however I will be without a rad in the hall way. Could I somehow come off the pipes...

I'd like to add a few extra sockets to my bedroom. There is only one socket at the moment which I think is a spur from the living room below. Is it o.k to take a spur from a spur and if so how many is o.k. Thanks Andy

The house is a 1930's type with no cavity insulation, the bedroom also doesn't have a radiator as yet! I've checked the attic and can find no evidence of water ingress. Other parts of the house do suffer from small mold patches but in places where there is no circulation, not on open walls...

I'm about to have my bedroom plastered and was wondering before I do is there anything that can be done about the mold which keeps appearing near the join of the outside wall and ceiling. I have heard that you can get plasterboard with foam backing to try and stop the wall from getting as cold...

Hello I'm having trouble with My Hinari Microwave (EMX741SSEG). Everything appears normal, rotation, lights etc but no heat is being generated. Any ideas. Thanks Andy

Hello My Candy washing machine is about 2 years old and has decided to spin the programme dial on it's own, the dial just clicks round and around and lands where it likes. This doesn't happen all the time but it's enough!! Any ideas on the problem. Thanks Andy

Hello My '97 1.6 Megane has started to rev high, this usually happens about 10 minutes into a journey when the car is up to normal temperature. When you stop and leave the car idle the revs pick up, drop then rev up to 3000. Can anyone shed any light on the matter. Thanks Andy

Yes the fill valve is closed and the system pressure is stable. I have noticed that it only seems to happen when the hot water pre-heat function is on. Does that make any sense.

Hello I've just replaced a radiator and refilled my combi system, the only thing is since doing it everytime I turn a hot water tap on my boiler (Vaillent 828e) makes a thud. Any ideas. Thanks Andy

Hello As I've drained parts of my central heating system down a few times lately I'd like to refil the system with inhibitor. The plumber who installed the boiler wrote what looks like "TSS M1" on the log book. Is this a generic number or a specific type or can you mix and match different...

Hello I'm about to fit a radiator and the nearest size I could get is about 80mm shorter. I've seen various ways of overcoming this problem but was wondering which one is the most effective. One of the things I've seen is a compression fitting that screws into the rad allowing you to use a...