Search results

Hello I am using a GD48 for my house alarm system. I have the RSS for programming the panel. I whant to create a user with only arming rights on all areas. Someone knows how to do it? Thanks

Hello guys I have a strange problem with a GD264 panel. So, when I try to set the system, a zone that is closed, change state and opens, and don't let me set the systems. I verified during the timed set if something open the zone, but nothing found. The zone is a motion detection, defined as...

Hello After changeing the 12V back-up battery for my alarm system, I get only 1.4 V on the battery lead (red and black wires). The rest of aux and +12V is ok, indicating 13.8 volts. Thank you

Hello It may sound stupid but I'll ask: What is the resolution of a camera in live view mode? Is the mainstream resolution? Or the mainstream resolution settings are only for recording, and the live view resolution is the maximum native resolution of the camera and cannot be changed. I allready...

Hello On my GD48 panel when I enter the menu from my kepad I get the next message: 1014 A1 +tamp s/c. When I display the zones 1014 is closed. How come? A1 can by set even with this message. Thanks

Hello, I have a problem with an alarm panel GD48, and I need to do a latest firmware update. The firmware is now 6.7. Please help me.

Hello guys I have a GD 48 panel and I whant to do a hardware reset to factory default. Please tell me the procedure. Thanks

Hello Can someone help me with ATS8600 software? I have an ATS4099 intrusion panel that needs to be reconfigured. Thanks

Hello I have a dsc pc4020 maxysys alarm panel, and I want to send the burglar events by sms on my cellular phone. What kind of communicator I need in order to do this. The onboard pstn line is for sending data to a central security point who has devices that translates the codes sent by the...

Hello you guys I need any version of entrapass software (special, corporate, global) to see how it works with an intrusion panel dsc pc 4020 Can somebody help me?

Hello you guys I am working on a cctv ip system with Interlogix equipement like TVD 1103 ip camera”s and TVN 21p nvr. How do I setup the camera that in case of a network failure to record on the Micro SD card? Thank you

Hallo you guys I whant to install an IP camera, hikvision DS-2CD2020f-i, but I don”t whant to buy an NVR for it. I will connect the camera on my internet switch, and browse the image on my pc. It is possible to live view the camera on my android smartphone just by installing iVMS4500 without...

Hallo On a site we have an ATS acces and intrusion system from UTC. All the readers where encrypted AES 128 I whant to take from this system 4 readers and use them on another site where they do not use encryption. My question is that the readers will work? Or I have to reverse the encryption...

Hallo I am about to design an ip cctv system and I would like an opinion about the components I use: IPC - Hikvision DS 2CD2620F-I - 36 pcs. NVR - Hikvision DS 7732NI-E4 - 2 pcs. SWITCH - Ubiquiti US-24-250W - 3 pcs. The ipc and switches will work in an industrial enviroment with 5-35 degrees...

Hallo I have a problem with a Honywell GD 48, and I m not sure if the connections for a 4 wire smoke detector are the right ones. I read on the internet that 2 wire smoke detectors are not compatibile with this panel. So I whant to wire 4 smoke detectors like this: The + and - from detectors to...