Search results

Mark, Many thanks for all your help and patience. I wasn't going to let this beat me and finally found the problem today by again getting up the ladder in the bell box and finding a loose wire in the connector. I then wired the panel up 'correctly' as per your advice and finally it works ...

Hi Yes my siren goes off and when I key in my no the siren keeps going until I press the 'X' on the Accenta + panel and it resets

In other words my alarm bell strobe and siren doesn't work if the connections are; Strobe - to ST - B - to s - But it all DOES work correctly if I wire it Strobe - to s - B - to ST -

No I said originally; When I wire it as above (correct way) the blue strobe permanently flashes on the siren box ((& the siren won't work)). I then swopped the two wires (incorrect way) and it works fine.

Tried it again & siren/strobe doesn't go off in alarm condition when wired 'correctly' but works fine when s- & st - wires are changed over ??

Hi No wiring is spot on and no cross wires. Alarm has been wired the 'incorrect way' for 4 yrs & worked fine (siren goes off when alarm actuated & strobe flashes). Can't understand how s - & st - wiring makes a difference what does s - do ?

Tried to wire in 'correct' way but siren doesn't work ? Put it back & it does ?? Any ideas please ?

Hi guys, As advised I have wired my Accenta G4 alarm panel that has the following terminals; Strobe + (not used) Strobe - T (SCB) A (SCB) D (Bell) + B (Bell) - To the AG6 siren that has the following terminals; TR - S - V + V - ST - I wired it as advised as follows: Strobe - to ST - T...

Thank you very much for your help & advice :)

Thanks. On the bell box there is a battery jumper and it has two positions. It is currently on the TEST and not on the BATTERY. Is this correct ?

Hi guys, Can you please help me ? I have bought a second AG6 bell box to go on the rear of my house. I have a fully working AG6 on the front of the house wired up to my G4 Accenta alarm panel. I only want to power the new rear alarm box to use the alternating flashing LED's only and not use...