Search results

Hi My grill started playing up about 4 weeks ago. When you turned it anti clockwise it tripped the electrics. This wasnt a major problem we just turned it clockwise. Last night we caught the grill button and it tripped all the electrics and now I can't use any of it including the oven. I...

Want to build a floating base platform bed can anyone give any advice or reccomend any links for tips Cheers

Hi Do i need to prime or seal a concrete floor prior to using T2 in a liquid batten System cheers jase

HI I have just removed the solid oak floor in the dining room from a concrete floor as i have knocked through into the kitchen and im replacing with another oak floor all the way through, i couldnt get an exact match so im doing a complete new floor. I did not lay the floor so was quite...

I am having a move around in my ensuite (new bigger shower and moving sink to another wall, toilet staying where it is). The current waste from the shower and sink run above the floor boards boxed in and feed in to the soil pipe in the main bathroom. What I would like to do is move the...

Hi i am putting up a 6ft fence using 8ft concrete post, 1ft gravel boards, and 5ft fence panels. Can i ask a quick question: for the posts can I use the ready mixed bags of Postfix from the diy stores or are these used more for wooden posts? or would i be better using a gravel & cement mix. I...

I have changed a rad in bathroom and slightly altered the pipework, to do this I drained the system by tieing the ball cock in the expansion tank and attached a hose to to lowest bleed point and removed all the water from this point. Upon refill i believe i have an airlock in the pipwork...

Hi I am fitting a towel rad in my bathroom. It requires 15mm valves but i have 8mm microbore pipes coming out of the floor. What do i need to buy to join them up - please dont tell me i need to change the 8mm micobore to 15mm pipework. thanks

just been looking under the floorboards at the CH Pipework to work out wether i can move a rads location my self or i need to get someone in. I have a query - can someone tell wether the flow and the return pipes should be equally hot as on i can bearly touch (very hot) and the other is just...

2 of my 3 down stairs rads struggle to get hot (some days they get hot, some days they get warm and some they remain cold) My thoughts are to remove these 2 problem rads and rinse through to remove any sludge ect if this doen't make any difference i thinking of using some of the sentinal...

HI I need to remove the radiator in the bathroom. It has only has a valve on 1 side of the rad. I have not removed this type before can someone please explain what i need to do. I have turned the white cap to the off position do i need to do anything under the copper cap. Also if i do need...

Am soon going to tackle bathroom and gathering all relevent info as it comes to me before i start. Shutting of water supply can i check the procedure 1 turn off main inlet (under Kitchen sink) 2 open all cold taps until run dry 3 open hot taps until runs dry 4 system now empty taps ect can...

I know this question has been asked a million time but i confirm the procedure - I am laying ceramic tiles in the bathroom Is it best remove floorboards and replace with 18MM wbp or put a thinner WBP over the existing floorboards, I dont really want to raise the floor much problems with...