Search results

not easy without more info - photocell?

Soot on the terminal guard indicates that the fuel old is not atomising, this may be down to a worn nozzle, loss of pump pressure, blocked air intake or blocked heat exchanger. By the sounds of things the boiler is going to require a de-coke. As an oil fired heating engineer, I would...

Don't know then. For whatever reason the boiler's pressure switch is not acting when you put the shower on. Without it in front of me to test it's impossible to decide whether it's shower or boiler.

Dirty pilot injector, thermocouple on it's way out or loose, can't remember if these have a high limit interrupter, if so the leads or connectors may be damaged. Is your heating system fitted with 2 or 3 port motorised valves, if so it sounds like the syncron motor isn't making the micro...

Do you live in a limescale area? Is the shower thermostatic - it regulates the temperature itself? Do you have any kind of other controls such as pressure reducing valves, blending valves elsewhere? Does the boiler operate normally? My money is on a seized shower thermostat at the moment.

As above, the boiler flue is not compliant. If products of combustion are entering your property is is immediately dangerous, if not then it's at risk, either way contact an engineer to test ingress to your vent, and follow industry unsafe situations. This may cause a big row with your...

If it's all you've got and it stops a leak it will do. Note the answers above.

The ignition / ionisation probe has sagged They bend away from the burner so that signal is lost on low flame. Blow torch until red hot and bend it back - need a gas engineer to do it, as 26/9 gas safety checks are required after. HTH

The red expansion vessel has either discharged or ruptured, the testing of them requires the boiler to be isolated from the rest of the system via flow and return isolator valves, and the boiler side pipe work to be discharged of pressure, there will be a schrader (car tyre type) valve on the...

The sums may add up in the future with the recent energy price rises. I was under the impression the poster was requesting opinions and advice, you've given yours.

You will need a negative head pump and decent filters. LPG is currently cheaper than oil (in bulk tanks) but I would look at heat pumps, biomass or even log burner boilers - Aga produce one. If you are going to throw yourself whole heartedly into this project you could fit PV solar panels...

I have fitted one of these to an oil system boiler wood burner dual boiler system - http://www.h2panel.co.uk/h2index.htm A combination boiler is not the ideal choice for such a system, but the use of a neutralizer and appropriate pipe stats, heat leak radiators and zone valves would make it...

Can anyone please let me know the dimensions for a shaver point above and to the side of a bathroom wash hand basin? Thanks

That's brilliant, thanks very much.

I'm changing a bathroom with mains pressure cold and low pressure hot via loft tanks and hot water cylinder. Would ideally like to get decent shower head pressure where hot and cold are equal. Is it an option to isolate the bath hot and increase pressure via a pump leaving the other side...

My experience is that when I lost my wallet and cancelled the card, then found the wallet again, I couldn't cancel the new card, but they sent a new one out for free and added my LPG qualifications for free too, so not always bad. It's just you can't reach them at all by phone or email at this...

Look at the landlord cert in the same way as a car MOT, that is in force for 12 months whoever owns the vehicle, same with gas safety certs. I'm corgi registered for natural gas and LPG, up to you whether you believe me.

Truth is you need Corgi, punters see it as a general standing of quality, I even got asked if I'm Corgi reg'd from someone wanting a bath suite fitted. Even today picking up a presure relief for an unvented, the woman in the shop asked if I was Corgi, if so could I service her boiler, fire...

While we/re talking about sooting up. I looked at a boiler (15+ yr old OF system boiler) about a month ago, on a I was never here basis due to the following. The heat exchanger was solid with soot, which I cleaned, the flue had some months prior been changed from a standard horizontal item...

Most I've charged I think is £185 for an hour + 1 hour travel at 3am in in the morning. Usual rate is £45 for first hour, £35 there after for repair work, charged at time and a half evenings and weekends (£67.50 & 52.50), most reapirs only take an hour.