Search results

Great, I have fitted several of those so will go for that

I’ve fitted a new Eaton branded Scantronic 9448+ wired panel that a customer supplied to replace the same old one that was 20+ years in service I’ve found the outdoor siren isn’t working at all and wondered if I can use any brand of wired siren or would this panel only work with selected...

I tried to but it doesn’t acknowledge any commands by reply sms like it says it supposed too

Hi mate, yes thanks for that the problem I’m having is it doesn’t respond to any command I sent to it and it’s supposed to text me back confirming when I’ve made a change to it. There is an app but it says it’s not available in this region, I’m in the UK so I also tried to VPN to change my IP to...

Does anyone know how to test one of these? It’s brand new with a working SIM card from a previously same model but the SIM card holder was broken I’ve powered it up and it’s got mobile signal with a slow flashing red led and I’ve connected a 12V pc case fan into the following for testing the...

She won’t arm it because she doesn’t want the system at all She says she doesn’t trust the alarm to work properly and my personal opinion is it’s more to do with there being 2 cats that are quite sick and prone to stress so she doesn’t want to scare them. She’s a very troubled person with a...

To clarify she locks the door She won’t set the alarm out of spite There is a SmartCom with single path WiFi

Yes The husband wants the wife to arm the system when she leaves the property She refuses to use the system and it causes the husband a lot of anxiety over the property being at risk There’s currently a door contact on the front door set to Entry/Exit There’s also a PIR in the hallway set...

I’ve had a reply from the Facebook group Texecom Technical Support Group which says Could you not just set up as a timed set. Say 30secs and then as long as the detection is not say in the hallway that would be ok.

The customer wants the system to automatically arm when they leave the house This is a request made to me because the customer’s wife refuses to arm the system manually because she didn’t want it installed So hopefully that makes sense?

In the Installation manual 6.2 Area Modes it looks like changing the zone for the front door from Entry/Exit to Timed Exit could be what I’m looking for and also changing the Exit Settle timer to something longer could be useful too incase the customer opens the door again like if they were just...

I have a customer with a request if possible When leaving the house the alarm sets, perhaps if no final exit (front door in this case) is retriggered after opening and closing within say 5 mins then it arms This would allow for situations where they open the door to take parcels or anything...

Ah okay no worries

I have a Pyronix Enforcer demo kit if you want me to test defaulting the engineer code to see if it resets the zones or not let me know Even if it does reset the zones it’s pretty simple to reprogram them

Anyone reading this in the future these diagrams will help

The objective was two fold To understand the existing layout and then replace the cabling And to understand how to run it all from scratch I appreciate all the assistance on this it’s really helped me, the homeowner wants to have the wiring replaced entirely so I’ve got my electrician...

I’ve tried to make a new diagram based on what I saw on this link, the video only has 1 light so my diagram is probably still not right

I’ve added some more to the diagram what do you think ?

How about this diagram, is it correct so far?

I will take one when I re-visit next week It‘s got the following to it: 2 core & earth, red & black, from the supply 3 core & earth, red, blue & yellow linking to the other switch which I have successfully continuity tested