Search results

Hello all I have just started getting back into the Garden after Winter and have noticed a few areas of Pointing on the Patio that are missing. The Pointing is Rompox Easy Basalt with Sandstone Slabs. I have also noticed that when the Pointing was done by the Landscapers that they did not...

Hello all I recently got a Plumber out to sort some issues with the Bathroom Radiator Pipes, including removing an 'S' Bend and moving the Pipes Forward. The issue I have now is, how do I fill the Holes in the Chipboard Flooring? The Flooring is not able to be lifted, I tried, it is a...

Hello all I had a Type 11 Radiator in the Bathroom replaced with a Type 21 in 2018. The Person that did the Work did not Move the Pipes Forward to accommodate the New Radiator, instead, he used Two 90⁰ Elbows as can be seen here: The issue is that the Pipes are pushing against the...

Hello all I have a Small Curved Gardening Knife that needs to be Sharpened, however, I am not sure of the best way to go about it. Any advice would be appreciated. Thanks in advance Kevin

Hello all I am looking at Replacing Two Type 21 Radiators with Type 22 of the same Size. The Pipes for the Radiators come up through a Chipboard Floor and need moving Forward by approximately 11mm to accommodate the Deeper Radiators. Are there any Tricks as to how to enlarge the Holes around...

Hello all My House is a Small Semi Detached where upon entering the Front Door you are in a Small Hallway, maybe 2m x 1m with a Door to the Living Room and Stairs leading to the Small Landing with Doors leading to the Bathroom, Small Bedroom and Main Bedroom. There is a Small Type 21 Radiator...

Hello all I hope you can offer some Advice. I had a small Water Leak from the Bathroom a few Years ago which caused some damage to the Kitchen Ceiling. The Local Council said that they could match the Pattern on the Ceiling which I agreed to, mistakenly. This is how the Area now looks...

Hello all The Central Heating Pipes that come down the Wall from the Airing Cupboard Upstairs are currently in a Channel made of Two Vertical pieces of 50mm x 30mm Wood and then covered with a 6mm Plywood Sheet. Unfortunately, when the Plywood Cover is Screwed in place it pushes against the...

Hello all I have an issue with One Radiator that I hope you can offer some advise on. I had a Type 11, 1000mm x 600mm Radiator Installed in the Living Room which had no Radiator prior, in 2018. Even though the Radiator got Hot it never sufficiently Heated the Room. In 2022, I had the...

Hello all I hope you are well. I had a Vaillant EcoTec Sustain 28 Installed in January 2022 under the Eco Scheme. I only had a Choice of Manufacturer, I chose Vaillant, however, I did not have any say in the Model or Kw Rating of the Boiler, that was left to the Eco Scheme and the Installers...