Search results

The wiring diagram, shows that for 230v, there are some bridges/links that need to be fitted for the L and N connections - which have been fitted on your oven already by the manufacturer. So you can just connect your suitable sized T&E cable to the L connection at the easiest location, in my...

Great progress, looking good :) What type of roof construction are you having? Hope you saved that downpipe, could be re-used on the front of the new extension :D

??? Japanese knotweed has shovel shaped leaves and the stem is bamboo like in appearance (i.e. with 'ridges') - this looks like a dandelion, nothing like ivy? :? :P

MORE CABLE CLIPS :mrgreen: :mrgreen: :mrgreen:

Should have got an extra red alloy for the wheelbarrow :lol:

Brilliant job on the turf / levelling out - considering the sloping! Look forward to further updates 8)

You're welcome. Just found another link on CNET - which should be more reliable, but is also a 'smart installer' http://download.cnet.com/Sony-Connect-SonicStage/3000-2141_4-10375164.html

Sounds like the cover is not for the chamber, at a guess (no expert) a cast cover would rest on a cast frame, with the chamber of rendered brick or concrete construction. I think you would be able to measure the diameter or width of the plastic chamber / rim and pick up a plastic cover of the...

Apologies :( They don't make it easy :(

There is a link here, only under 1MB though - worth a look :) http://sonicstage.en.uptodown.com/

Boot up the desktop and hit ESC, F1, or F12 - whichever key will let you get into the BIOS settings of the machine (it should say on the POST screen). From within here, check if you can set 'auto power times' or similar, most BIOS offer such an option, so the machine can come on by itself, at...

To plug the device directly into your laptop, you would need a crossover type network cable. From your description, it sounds like you have a wireless router though? Therefore, you can keep your laptop on the wireless network, plug your device into the router (as it should have some spare...

Got a picture? Normally, on the hinge side - under the hinge covers or similar, there will be a hex head screw - allows adjustment to make it square again. Or depending on the hinge / door design - it could be like this: http://i246.photobucket.com/albums/gg105/tuggy1/hinge.jpg This...

Thanks all, PCB was replaced - pump now behaving as expected / back in control of the boiler. 8)

Appreciate you looking that up mate - cheers 8)

Just in case it turns out to be the PCB - I recon this is the correct Vaillant Part Number for a ecoTEC Plus 428? 0020036861 As a side note, would this be covered under insurance? Just realised I could save a pretty penny like that! :) Thanks for all the advice :)

Thanks all for the speedy responses. @ 45yearsagasman - yes, this is an S-plan, so great - I will use a multimeter to check the output of the orange wires from the MVs (which are not connected in the wiring center, neither is the grey) to at least put them out of the equation. Should it be...

Hi, The pump on my system has recently started to keep running 24/7, regardless if there is any demand for CH or DHW. Pump = Grundfos UPS2 15-50/60 MV = 2 x Honeywell Model ? Boiler = Vaillant ecoTEC plus 428 Searching on the forum, suggests the MVs could be faulty - however, the pump...