Search results

One every 400mm will be sufficent.

Thanks for the reply, will take your advice.

Have you any antivirus / firewall software installed, e.g. norton / mcafee? If so, disable this and see if the problem still occurs.

Work out exactly where you are placing them. You don't want to interfere with the spacing of your joists.

I don't intend to concrete the whole area, but rather use paving slabs, spaced out to provide support for the joists. The ground where the decking is being placed is pretty level, so as far as my thinking goes, I have a few options. Lay the paving slabs so the entire site is level and...

Going to do an L shaped deck. Will attach to house via ledger, spaced 10 - 12mm from house, but was seeking advice regarding the 1 in 100 runoff. Shoud I raise at the house end by 4cm (to cover 4m decking), or start ledger at the lowest point and have the 4cm at the garden end? I'm...

Decing

What about earthing arrangements? If it is a sectional garage, I assume it is housed around a metal frame. (Sorry if it's a silly question, just curious when reading this thread) Johnnypanic

Thanks for that. Never thought about painting it white :oops: Might well be the best solution, as I'm thinking of running two cables (wife's talking about a log cabin :roll: ). Really prefer to have a metal junction box near the cu, always the man for a belt and braces approach...

Hi, need to bury some 6mm SWA cable soon. Regarding it entering the house, I had planned to run it up the gable end of the house, thru the loft to the consumer unit. I live in a white pebbledashed bungalow, so was thinking of using white pvc conduit, on the gable end, to house the swa...

Thanks for that, will get a new olive. Will also learn to read my post before pressing the submit button :oops: Cheers, Johnnypanic

Wooden floor in one of the bedrooms, moved so much it has pushed up against one of the radiator pipes and caused a kink, lifting the floor at this area has case the pipe to split slightly at the bend and unfortunately leak :( I've dug out around the pipe, but want to check that what I intend...

Cheers for the clarification 8) Okay here goes. I think I can sort the mix out okay, but as they are square pillars, I'm wondering what way to work with the corners. Do I need to buy something to attach to each corner before plastering ? Or is it sufficent to plaster each side and "tidy...

Suppose a joke reply is better than none at all :roll:

We had rats in our attic, twice :cry: Hired a pest control firm, who were pretty damn useless. Contacted the council and the local environmental health department and was told it wasn't their problem, even though my wife was heavily pregnant at the time. Eventually got rid, by blocking...

Any takers :?: Johnnypanic

Thanks for the replies. Quite a bit to look at. Never though sorting out a garage would be such a pain :roll: Johnnypanic

Hi, intend to have a garage build, but I'm in a bit of a chicken and egg scenario. As I don't have a clue regarding costs, I don't want to have plans draw up and find that it's way too expensive. Is there any software available (free of charge hopefully), to draw up at least a rough plan...

Hi all, first post here, so please be gently :) Have built some pillars at the front of the garden using block. Want to pebbledash them, so any advice would be appreciated. Cheers, Johnnypanic