Search results

Just to add (#2): Checked the water level system ie little tank at the bottom of the drum, the pipe and the pressure sensing diaphram switch. All clear of blockages, plus if you blow into the pipe (to simulate water pressure) then it resumes "draining" as you'd expect.

Just to add, by trying lots of cancel and programme select combinations I found one that will do a partial water fill (so the cold fill valve is ok) and another that fill do a partial pump out (so the drain pump is ok). Still stuck on rinse when any coloureds / cottons is selected though.

I'd be very grateful for any help with this problem. Mum's WFF2001 seems to have stuck in the spin / rinse cycle of a 40 deg Cotton wash. Initially it just stopped after a spin, still full of water. I ended the wash using "X" and Start, got the three Main + Rinsing + Spin light...

Sorry to be dense, but these 3x1 boards running accross the joists - what size gap is best between them? And I assume I'd need to run pieces down the joists too to stop the large boards flexing? ================================= see forum rules 17 & 20 This post is nearly 18 months old