Search results

im told by other plumbers it wont work with a torch as its ultra violet light given off by the flame , i was bit unsure about that , this is the problem im told its obsolete and cant get spares

yeah it lights mate , i took off the inspection plate , watched it fire up ok it does every time just wont stay lit for more than 30 secs to me its either the cell of its clagged up with carbon and crap , it did start to smell , oh yeah its an inter oil

its moulded plastic mate , that is an option though , it could be split and soldered, was hoping to replace it , not hunded percent that is the problem ,the boiler was on but starting to smell so i turned it off ,then it wouldnt re start ,so i thought it was maybe the cell ,it would fire but...

Hi can anyone help please , i have an ancient oil fired boiler a thorn panda 55 and the flame fires up but goes out after 15-30 sec re-sett button lights up , the photocell does have a dodgey wire to it , as it has been twisted and kinked over the years does anyone have any idear were i can...

its an existing instalation but the original cable was inadequate ,i was going to take some tails from phase blocks after the meter in the house ,to feed the rcd .At the other end of the circuit ,the original cu in the out building is 60 amp but il'e probably put a new board in with a 40 amp rcd...

if i can get hold of some split con can you see any problems with that ,least i can use an rcd to protect it thanks lee :lol:

my hands are up i didnt know thanks, i have the cable thats all , we used to use it on street lighting but protection was either a 1361 or bs 88, il,e buy some three core swa cheers mate

hi need some advice please , i need to run a supply from a farm house to another out building.the runs about 45 m the load is 60 amps , the farm house is fed from an overhead supply,therefore TT system, my question is about cable protection ,the cable i have is 35mm concentric ,which would have...