Search results

Hi Agile i am taking it seriously, i have only had the boiler in for about 15 months and was wondering what the error code was that was flashing,i have now found out that it is reminding me to get it serviced,which i intend to do as soon as i can find a engineer, thanks for all for all your help.

Thanks superdupergasman for your help will get it serviced asap many thanks.

Hi thanks for your reply, yes it could be SE so i probably should get it serviced, is there a way i could stop it flashing the reminder until i can get it serviced thank you.

Hi i have a worcester greenstar 35cdi which seems to be working fine,except it is flashing with the error code E5. Can anyone tell me what E5 means please thank you.

The best product in my opinion for varnishing floors is dulux diamond glaze, it can be bought in clear or tinted to various colours, it is not cheap but well worth the money.

Thanks breezer will remove lamps and put fuse in again if it blows will get an electrician to look at it,if it does not blow i will replace lamps and have it easier than trying to find an electrician to sort it thank you for your help.

Thank you for your advice but i do not have a meter and probably would not know how to use it ,looks like i need to get an electrician in many thanks

H thanks for your reply,the fusebox is brown,the cable is white pvc,there is nothing else but lights on this circuit,i will check all light fittings in the morning when i can see them properly thanks for your help.

Hi can anyone tell me why the fuse 5A stopped working today,i rewired it and fitted it back into the cu turned on the switch and it went bang,i tried this twice with the same result,so at present have not got lights,sockets ok and i have not touched the electrics. Any ideas please.

Thanks for the replys, i cant alter the pump speed on this model, and no it is not connected to microbore

Hi this is additional to the last post,i have just pulled up some floorboards in the bathroom, and found the rad has got service valves on the flow and return to the rad could this be causing the noise ?

Thanks for your advice slugbabydotcom,i will fit the bypass at the furthest rad on the top floor, just a pipe joining the flow and return and not a abv is that right. Have looked on the site you refered me to, not sure if the bypass was a valve or just a pipe,please could you put me right, many...

Thanks for your quick reply, no it is not just the bathroom rad that is noisy most of the others are as well except for the top floor (3rd floor). I will drain the system and check for blockages as you sugest, not quite sure as to what you mean about bypass on furthest rad from boiler,could you...

Hi thanks for all your replys,the pressure in the system is stable,dont think there are any leaks. There is no auto bypass fitted but i am using the bathroom rad with both valves fully open the trv head has been removed. The noise is a bit like the water going through at high pressure for want...

Thanks for your reply if you mean trvs then yes they are bidirectional .

I have a problem with a W Bosch Greenstar 35CDI,when it is running some of the rads are quite noisy, as soon as i turn on the hot tap the noise disappears, i have bled the rads but cant stop the noise unless i leave the hot tap slightly on,any ideas as to what the problem could be please ?

Hi could anyone tell me if i need a pressure reducing valve,it is to stop the noise in the pipes or rads well some of them it sounds like a kettle that has not quite boiled. The boiler is a Greenstar WB 35CDI all rads have trvs but i have taken the head off the one in the bathroom,it is running...

Thank you for your reply will fit as close to boiler as poss.

Hi how close can i fit this valve to the boiler which is a WB Greenstar 35CDI,it is mainly to reduce system noise thank you.

Thanks for your reply,the noise is the flow of water through the rads. All the rads have trvs fitted but the one in the bathroom is fully open,i cant find the manual to set the boilers bypass up correctly any ideas please