Search results

Hi, I have converted my cooker from NG to LPG and have fitted suitable fittings and gas orifices (jets). Everything working ok but have to adjust hob burner tap to obtain correct flame height. I have to access adjustment screw to do so. I have removed control knobs. Do I need to...

I selected 70 deg intensive cycle on my DW. After 15mins approx DW stops working. A continuos beeping and clicking noise is coming from the programmer. The program select button and start button stay on so I cannot count the number of flashes to identify problem. When I open the door and then...

My dishwasher is showing error 4 flashing lights. This I understand from previous posts is a drainage problem. I cleaned filters and inspected pressure switch all ok. I emptied hot water into the m/c and ran same. The water drained away ok. I then selected a program and ran m/c. After...

Hi, My machine has recently developed a problem, fault F05 flashing on display towards the end of a cycle. Machine a year old. Any advice would be appreciated.

If anyone has any info on above would be great. Recently washer is unable to complete full cycle. Beeping noise after approx 20mins. LED flashing 4 times. Washer 8 years old, first time this occurs.

Hi, I have noticed that there is a grinding noise coming from the machine when is use! I have removed the panels and disconnected the belt from motor to back of drum. Noise is still there when I spin the drum. I noticed there were also one or two little fragments of metal under the machine when...

First off, I am not quiet sure if I have the right forum here, but anyway if there is someone who has any ideas on the following that would be great. I have a climate master geothermal heat pump installed with a garden collector fitted. I am getting an error message E02 on the display, which is...

I have recently installed a power shower with a stuart turner pump ST55. In the shower itself I have a thermostatic mixer from which the shower head is connected. There are different settings on the mixer but I have mine set for 38 degrees. The problem that I am having is that the hot water is...

I have recently started the plumbing for a power shower in my own two story house. For the hot water inlet to the pump I drained the hot water cylinder and teed off a three quater inch copper hot water pipe for the downstairs taps and fitted an isolation valve before the pump. Is this method ok...

I have recently started the plumbing for a power shower in my own 2 story house. For the hot water inlet to the power shower pump what I have done is drained the hot water cylinder in the hot press and just teed off the three quater inch copper hot water pipe that was for the downstairs hot...

I am considering buying a Stuart Turner power shower pump. As I am living in Southern Ireland our copper pipe sizes differ from the UK which is where the pump is made. The difference between the pipe is the UK pipe is 22mm outside dia. and the Irish pipe is 21mm outside dia. When you purchase...