Search results

  1. M

    Wet rockwool insulation - HAS to be replaced?

    Help please. Short version - some of the rockwool insulation in my roof got wet. Should any bit that got wet be removed, or can it stay if now dry? Longer version - water had been dripping from an old chimney that's had a section removed (from about 40cm above the joists, with the remaining...
  2. M

    What to do with outside wall - re-point then use silicon masonry paint?

    Help please! My neighbour 'helpfully' pressure washed a north facing outside wall on my house. Not all the moss has been removed. Some paint and pointing has come off. In places the pointing/mortar has been washed out to about 20mm depth. I'll get a proper trades person in to fix it but not sure...
  3. M

    Replacing old ceramic hob with new induction hob

    Hi folks My elderly mum is moving into a warden-assisted flat and the kitchen has a broken worktop which we want to get replaced. It's got a ceramic hob in it which we think is safer to place with an induction hob. Question is, what kind of trade do I need to find? Kitchen fitter? Chippie? Do...
  4. M

    Ok to plug Laser Printer into Switched Fused socket with Freezer?

    Hi folks Hope you can help me with this one. Moved a Laser Printer to the utility room without thinking about sockets :rolleyes:. Nearest socket is wired into fused switch socket for a freezer. Can I plug in an adaptor and safely have the freezer and printer both plugged into that? Might the...
  5. M

    Is there a superglue that's liquid not gel?

    Hi folks I want to do a hack with superglue and sodium bicarbonate, so it needs to be liquid superglue. Any idea which superglues are liquid, not gel? Thanks!
  6. M

    Ready mix mortar for sail posts?

    I've bought a 4m x 3m garden sail with 2 galvanised steel posts (the other two corners will be attached to the house). The instructions say the poles should be set in holes 400mm x 400m x 800mm deep. The bottom 100mm should filled with gravel. I'm trying to work out how much ready mixed mortar...
  7. M

    Help - sound bar stopped working

    Hi folks I have a Majority Snowdon II sound bar, connected to a Hisense LHD32E130TUK TV (not a smart tv) with an optical cable. It's been working fine for seven months, but now even though the sound bar is on, no sound is coming out. Without another telly or sound bar, are there any diagnostics...
  8. M

    Painting old wall that is gloss and plaster

    Help, what do I do? I've stripped off the old wall paper in the loo and have bare plaster with patches of gloss paint. I want a painted finish. I'll rub down the gloss paint to create a key. What's a good primer? Some of the posts here recommend Dulux Super Grip Primer. Would you use that? Or...
  9. M

    how to treat a pine table for outside use

    Hey folks I've got an old pine table which I want to use outdoors. Another (very old) post says 8 coats of yacht varnish. Would I have to keep revarnishing, if so roughly how often? Is there any new product that would do the job with little maintenance. And what about the bottom of the legs...
  10. M

    Save me from myself - tempted to paint over vinyl wallpaper backing

    Hi folks Have struggled all day with this. Please save me from myself - don't be too harsh! I've stripped the top vinyl layer off the wallpaper in my loo. The wallpaper is at least 20 years old and I'm left with the robust 'backing' paper which is very well stuck to the wall and I am sooooo...
  11. M

    Painting doors laid horizontal vs vertical, using Bedec WB paint

    Oh dear. I am feeling stressed by attempting to get these 6 doors painted, ready for the carpenter to start hanging on 2nd Jan. Just removing the sticky labels and sanding (see previous posts) has eaten up a lot of my time. I used to be able to get a really good finish with olde style gloss, on...
  12. M

    Should I sand the primer, or undercoat then sand on primed doors?

    Hello again! I've got Howdens primed doors that have a routed detail. https://www.howdens.com/doors/internal/primed-doors/primed-internal-linear-door-obj-sku-family-dir1560 In many places the router has left some roughness - you know the kind of hairy edge you get when you cut something like...
  13. M

    Getting the label adhesive off Howdens primed wood doors

    Hi folks I've bought primed wood doors from Howdens, and I'll be painting with water-based undercoat and top coat. There's a 7" label on the side of each one. Water and a rag takes the paper of the label off, leaving the adhesive. Usually I'd use lemon oil to remove this kind of adhesive...
  14. M

    iplayer on laptop won't play

    Hi folks, wonder if you can help. I'm using my laptop to access BBC iplayer but it won't play any programmes, the busy pink 'busy' circle keeps going round. I can watch live, and I can listen to old radio programmes. I did an internet speed test, and it was nearly 9Mbps download which is...
  15. M

    Insulating a condensate pipe

    Hi folks I've read the other threads about insulating a condensate pipe that runs outside, and opinions seem to vary between 'it won't freeze' to 'use a trace heating'. Last two winters, the condensate appeared not to freeze, ie no problems with the boiler. But the foam insulation has worn...
  16. M

    What's the best order for new carpet, paint walls and skirting boards?

    Hi folks I've decided to re-do my hall, stairs and landing. What's the best order to do things in? If I paint the skirting boards before the carpet's laid, won't the carpet kickers damage the new paint? But so much easier to paint without carpet there. What do you recommend? Thanks folks Mary
  17. M

    Loose TV aerial connection?

    Hi folks During the storms last week, I kept losing the TV sound and picture. At its worst, I was getting 1 second of picture and sound then couple of minutes of nothing but a message saying someting like 'No signal or signal weak from transmitter'. Once the storm was over, normal service was...
  18. M

    repair to crunched car door - replace or beat out and spray

    Hi folks Mini Cooper Clubman 2009 I drove out of parking space all of 1.5 metres but had turned the wheel too soon and crunched the nearside door against a metal post. It's a white car so almost impossible to show the damage in a pic. The dent is in several places, above and below what I 've...
  19. M

    Radweld - how much to use?

    Hi folks Since getting coolant warning light a few days ago, I'm adding about a litre of fluid to the radiator each morning to get it up to Max' level. So I bought some 250ml of Radweld which says 'Treats up to 17 litre'. This website says the coolant volume is 5.2 litres. Do I chuck all 250ml...
  20. M

    Where to buy internal doors

    I want to replace my flimsy hollow 1950s internal doors with oak veneer. Assuming the rights sizes are stocked, which supplier(s) do you recommend - Howdens, Jewsons, TP, Selco? Thanks Mary
Back
Top