Search results

  1. C

    Vax vacuum cleaner

    Hi, my vax works but is very noisey. Does anyone have any suggestions ? Cheers Carl
  2. C

    Hot water flow

    Tap replaced and problem sorted .:) Thanks again Carl
  3. C

    Hot water flow

    Thanks guys for replies. What is and where would I find stop tap ? This problem is only recent , the stop tap has always been as it is Can faulty tap be repaired or does it need to be replaced ? Thanks again Carl
  4. C

    Hot water flow

    Can anyone explain why my hot water tap flows for about 5 seconds then you hear a thud in the pipework and then the flow stops.turn tap off then back on again and flow returns for about 1 second then stops again. This only happens to the upstairs bathroom tap. The boiler is downstairs. Hope...
  5. C

    Below washing machine

    Thanks for reply. It looks like sludge is being forced into drum through drum holes from outside of drum, looking at Marks on clothes. Any idea what is causing this ?
  6. C

    Below washing machine

    After a wash the clothes are marked with a sludge type deposit. Does any one know the cause of this .? Thanks
  7. C

    radiator

    THANKS. rad seems to be working fine now.THANKS AGAIN Carl :D
  8. C

    radiator

    i have a radiator with regulator and normal valve.the inlet pipe before regulator vave remains cold, the bottom of rad remains cold but the top of rad gets warm and outlet pipe after normal valve gets warm . After 10 mins rad cools down. All other rads in system work fine.please can anyone help :(
  9. C

    plasterboard

    thanks. really helpfull
  10. C

    plasterboard

    thanks 4 that. how would you make any joints not noticeable?
  11. C

    plasterboard

    is it possible to paint plasterboard or does it have to be skimmed. its only a small area under the stairs thanks carl
  12. C

    toilet vent pipe

    THANKS. i will take that onboard. i`ll let you know how i get on. carl
  13. C

    toilet vent pipe

    i`m having a new toilet fitted but the vent pipe cant go through the outside wall because it overhangs the boundary.the pipe can go directly up through the roof but i think will look unsightly from outside. can the pipe go up into the loft space without causing a stink inside the property? i`ve...
  14. C

    combi pressure

    expansion vessel charged to 1 bar using a footpump. hey presto everything is working fine now. THANX EVERYONE
  15. C

    autoair vent

    aav replaced,problem solved. simple job, i thought i`d got major problems. THANX CORGIMAN Carl
  16. C

    autoair vent

    can anyone explain what causes water to be sprayed from the auto air vent on a worcester240 boiler ? thanx
  17. C

    combi pressure

    Thanks for replies. When topped to 1.0 bar when cold then fired up the pressure increases to 3.0 bar, opens the pressure relief valve and trips the system. Can the expansion vessel be repaired, re pressurised or does it have to be replaced? If all else fails i`ll look at replacing pressure...
  18. C

    combi pressure

    I have a worcester 240. When in use the pressure is approx 1.5, when boiler shuts down pressure drops to 0 and then pressure increases to 1.5 again when boiler ignites will this cause a problem? how do i cure it. thanks
  19. C

    hot water problems

    Followed advice. When hot water turned on fully (sometimes get hot water) CH flow pipe warms up slightly when HW turned off CH flowpipe becomes very hot for about 10 secs. When HW turned on and temp remains tepid or when washing machine calls for hot water CH flowpipe becomes very hot. THANKS...
  20. C

    HOTPOINT AQUARIUS

    When starting a wash ,the machine begins then switches to pre wash where it will remain idle untill wash is selected. Has anyone any ideas what is causing this THANKS
Back
Top