Search results

Thanks for response. obviously I need to go and pull this down and start again. what would be ideal size of hole and what is best concrete as before I used 3 bags of post fix for each hole .[/img]

STEVE, If you live near a Plumbase they do a 1lt " ONE SHOT " about £5-7.50. Can be used on iron , steel , clay and lead pipes andy

YES, IS THIS NOT ENOUGH THEN ?

fence panels 6ft by 6ft, post were 8ft of which got set in ground 2ft. sorry have no pics of this.

steve, looked on MSN and typed in blockbuster drain cleaner , it gave a few firms that will supply this. andy

Yes, it really was 3 ft down by about foot a half sqaure. This was done last summer when ground was quite firm. at the time digging down, the ground was about 1ft soil and the rest was a hardish clay. Yes , this was concrete all the way, when I wobble post now all you see is a massive...

Hello, I put a row of pannelled fence in my garden last year, these was 6 x 6 and fixed with posts either side using fence clips. I dug down about 3 ft and concreted every post into ground...now we get to the problem !! Last time it was windy the post started raising out of the ground with...

This system is new as are all pipe work, the main problem is this code of L8, In the book it states 0 is no heat sorce and 1 is heat source. but because I can not change this to 1 it will not operate. I am wodering if this points to the PCB board or a dodgy control panel ? Any help gratefully...

have one of these boilers and it will only work when + & - are held for 5 secs, this then goes in to commission mode for about 10 mins and then cuts out. when you go on diagnostic mode it has code of L8, of which is " calling for heat ". the setting should be 1 but is stuck on 0, when you...