Search results

Hi,we dont seem to have anything coming out of the hot water taps,cold water is fine also heating is working fine,boiler pressure is approx 1.2 bar,everything was ok last night,any ideas please

yes john guest type push fit

yes push fit type (plastic if that makes a difference)

Hi,sorry but a real basic question,do stop ends come off pipes easy without any tool? Thanks

HI,on exposed valve mixer mixer showers are the pipe centres fairly standard at 140 to 160mm,as having bathroom re furb,new pipes for shower are in (roughly),tiler is on the way and ive not bought the shower yet....doh......basically dont want it tiled then find out ive got to move the...

would the new boiler still work ok,if i had to have the upgrade on the incoming pipe at a later stage?

Hi,Im in the East midlands,looking at having my bathroom (7ft X 8Ft) walls and ceiling skimmed before new bathroom is fitted,what would an average price be please,all walls are basically sound with no crumbling..ive had quotes ranging from 100 to 250 quid.... thanks

thanks for your reply,im having a Glow worm Flexicom CX 30 fitted,does my engineer need to do a flow rate test and see if its within spec for the boiler?

Hi,Im having a gas boiler fitted,the gas safe engineer has said that the 15mm lead pipe that comes up to the meter may need upgrading,who is responsible for this the gas board or me? i

Hi,just taken my HWT out plus all the copper pipes,as having a combi fitted,whats the going rate in scrap value for this please...thanks

hi i have a worcester hoppamat 45 solid fuel boiler fitted is this part of the scheme? many thanks

Hi, I have fitted a Glow worm flexicom 30 boiler,and a boss digital room stat,(all new less than 3 months old)problem is the boiler has stoped working automatically from the stat but fires and works fine on manual overide on the boiler? any ideas thanks

thanks,re bottom weights what am i looking for?,will they be attached in any way,what normally happens to the bottom weight?....ive seen the shocks ......not sure if the drum runs smooth,again what am i looking for here? many thanks ps did notice when i pulled the machine out last night there...

yes the ball should be there also check the top weight and bottom weight is not loose, otherwise yes needs a new drum you cant get at these it a complete drum assy cost over 100.00 . thanks for the reply....ive checked the top weight this seems ok,also the springs are in place,cant see a...

Hi..wonder if anyone can help...this machine makes a real loud noise on fast spin,sounds like a jumbo jet trying to land in the back garden...could this be a bra wire or are the bearings or shocks gone...how do i tell if the bearings are gone..also because of the vibrations the black pipe that...

straight away he is lying when he says you need to replace it with a combi, this is nonsense, of course you can just change the boiler for a condensing boiler, if you are not happy with his opinion, get another gas installer in for a second opinion....... ok thanks,can you tell me if i can...

Basically we had an inspection on the boiler last friday to gain a gas certificate as we going to rent the property out,the boiler has been capped off as unsafe.the plumber told us we need to replace with a combi? seems excessive as its only the boiler that gone wrong,so why replace the whole...

Got a 2003 reg SEAT ALHAMBRA with the 2 ltr VW engine,what engine oil please 10/40 or 15/40......wife does mostly town driving

Hi, Please help,we are getting the following fault code of 25 come up on the display,you should be able to press P (programme) and it will advance to a programme but nothing happens,the code 25 just stays there,any ideas...... thanks[/b]