Search results

I don't think it is? Model number is ER 7831 1 electroulux if that helps

I have an electrolux integral fridge freezer 50/50 (approx 8 years old). Once defrosted and then turned back on, there is a very quick build up of ice inside the fridge (within an hour or so) on the back at the top. Even when turned up full the thermometer reading inside the fridge is still only...

Thanks for this info. If I wanted to put a washing machine on the same waste, how would I go about this?

I am moving a kitchen sink and the distance from the sink to the soil stack will be just under 5m. How can I make this work - Can I use an air admittance valve? If so where does it need to be? (ideally behind the sink units - is this possible?) Or are there any other solutions?

Hi there I have a Bosch Classix washing machine. A month or so ago i had left a pocket full of 5p coins in my jeans and put them in the wash :roll: . After that wash, when the water drained there was a clunking sound coming from the drain sump. needless to say it was full of coins! I removed...

Thanks guys What is a pumped reline?

I live in a 150 year old cottage. We have been there a year and when we moved in it had a living flame gas fire installed. We wanted a wood burning stove to be installed. I had the gas fire removed and are now ready to have the stove installed. The chimney has a liner suitable for a gas...

I live in a 150 year old cottage. We have been there a year and when we moved in it had a living flame gas fire installed. We wanted a wood burning stove to be installed. I had the gas fire removed and are now ready to have the stove installed. The chimney has a liner suitable for a gas...

I live in a 150 year old cottage. We have been there a year and when we moved in it had a living flame gas fire installed. We wanted a wood burning stove to be installed. I had the gas fire removed and are now ready to have the stove installed. The chimney has a liner suitable for a gas...

If a competant DIYer did any Part P electrical work without going through the correct channels of getting the work approved, what is the chance of them getting caught?