Search results

why havent the plant got hi vis, on? soon they will be asking for a method statment how do you crap with your hard hat on.

you did note employe the ****** so keep your mouth shut and go on your own should be easy for you there is a lot of takers out ther.be lucky.

tell the client you you have to finnish the work you have undertaken and i will be wih you at a date? be honest thay will understand thay would note like it if you walked off there work untill you have finnished. brig

flood the joint and call the fire service out

i ] did you use quick dry in the past we have left a few tiles out and blocked and spanned with ply regards brig

i ask a pole on site who are you a fraid of in the uk the anser the chinese thay under cut us on jobs ,the builing industry in the uk is finnished,just a few more romananains,who needs the bombers thay are doing it on every job ,wak a day and try fixit the next day

thats why its called a game mate .solidaraty join up on the web regards brig

hi use sarnafill good price and 25 yr gar/tee

hi looks like the rafters are 4x2 so you can use a 70mm celotex board cut between the c/rafters leaving at least 30mm from your roof felt. start at the foot of the rafter and carrie up untill you reach the ridge and leave 30mm gap and continue down the over side.this will leave a contiuse air...

hi your exiting purlin does not look if it is doing the work it should be doing flat against the c/rafters , an angle at pitch. regards brig

the wall plate should be higher than the outer skin wall so as the foot of the common rafter can carry the soffit and the face board ,if your cavity insulatoin is not protected it will collect water under your roof coverings,you must use a plastic roof vent or ply detween your trada or trusses...

you have got in one i remeber i did fix the neutrals on the lighting block i was working by candle light my temp light had given up at the time, thanks again

2.5 to the spurs . i have a splitter c/u and i a put the 2.5 nutrals on the lighting block bar 16amps thanks

aslong as the cavity is closed to stop the comdensatoin buidind up all is ok

hi thanks you got in one .i remeberd i did fix the commons on to the the wrong buss bar on the lighting side thanks again brig p/s reply

hi i have installed a ring main in my new kitchen 2.5 and wired it to the c/u by a 32amp, m.c.b to a r.c.d 80amp 30mil amp the new walls have been plastered on dot and dab p/board.the r.c.d. trips but when i wire on to a 16 amp m.c b not protected by an r.c.d it works fine a have 6 no s/u/let...

the cavity should be sealed at the top of all walls with a sock filled with insulatoin you can buy at a builders merchants. brig

hi i have in stalled a ring main in my new kitchen on a 32 amp mcb and 80amp 30 millamp the new walls have been plasterd on dot and dad p/board the wall are not fully dried out as yet. when i have wired up to the 32 amp the r.c d trips ,i did wire it on to a 16 amp mcb with out a r,c.d it...