vibration

Hello, everyone! I've been experiencing a problem that I initially thought was related to the fan at the back of my oven. However, I've now realized it's not that fan causing the issue. There's a noticeable "vibrating" noise when the oven is running, and it continues even after I've turned it...

My previous Bosch washing machine gave up after about 12 years, so I've bought a new one. This one seems to shake / wobble / vibrate a lot more. It's not 'walking' or banging, but I imagine it can't be good for either the washing machine or the floor. I have removed the transit bolts and plastic...

Hi all, Moved into a property earlier this year and noticed a really strong vibrating sound coming from the cylinder room on the top floor. It happens for maybe 4-5 seconds in the morning when we're drawing hot water for the first time. Usually notice it when one of us has a shower in the...

Got Honda CRV MKIII and noticed when getting into the motorway and starting to build speed can be on the 4th 5th or 6th shift no difference the car start vibrating very bad. This is usually between 50/60m speed and then once the speed is there you can push over 60 vibration disappear again...

Hi, my central heating uses a Grundfos UPS 15-50 which is about 15 years old. Over the last few months it has started humming, it's not very loud but in the wee small hours of the morning it resonates through the pipework and wakes me up. The pump is mounted in the middle of a horizontal L...

Just had my boiler serviced, two hours after the engineer left, the boiler suddenly started making a very very loud humming/buzzing noise. The vibration went through the house and through me. It sounded like a truck was about to come in the patio doors. The experience lasted 2 minutes and then...

Hi I'm about to lay porcelain floor tiles on a concrete screed in a new extension. No underfloor heating. The tiles are fairly small (50cm square / 50 x 25). Area is 7m x 3.5m. Should / can I do anything to counter the noticeable vibration when I walk across the screed? When I walk normally...

Morning. I have the above lawnmower and it’s developed an awful vibration when in use. I did a Google search and thought it might be the blade so replaced it, and whilst performance is a little better, the vibration is still there which is incredibly annoying! Nothing seems obviously loose so...

22mm tubes going through a solid 9" brick wall. 30mm holes drilled- strapped a spirit level to the drill & a square to the wall so they're straight and level for a change. Question- is that 4mm gap going to give me annoying rattles and creaks when thermal expansion kicks in (the 2 tubes are feed...

Hi. Over the past couple of months the hot water system in my house has started making an incredibly loud reverberation when a hot water tap is opened. I would liken it to the sound of a ruler being twanged on a desk. It is very loud and fades to silence over a period of about 3 or 4 seconds...

Hi, My combi has started shaking intermittently during the recent stormy weather almost as if air pressure is getting trapped in through the flue somehow.(sounds a little like a washing machine on spin in the next room) If I turn the thermostat down, it stops and then runs normally when I turn...

I've seen a lot of discussions of washing machines on suspended floors but not much on solid floors. I am putting laminate throughout ground floor, and wonder what to do about the washing machine. My options are: 1. Leave a hole in the laminate to place the washing machine on the screed...

I have a Vauxhall Astra 2004 Reg (Mark 4). When I get to around 70 mph the car starts to shake; this is a recent problem. I've had this before (exact same symptoms) and it was due to worn down tyres. However my tyres currently are fine (I've checked tread depth etc). Also I recently torque'd...

Hi all, We have a Remeha Avanta Plus 28c Combi boiler. It has been serviced regularly and is still working well, but the plastic casing has started vibrating intermittently when in operation. It's not a loud noise but enough to be irritating when we're in the kitchen - pressing on the case at...

Hi all, Current project is building a customised shower for our boat. The design hinges around cheapness, but one that fits into an unusual space. Currently, plan is to create the shower tray from successive layers of marine-ply, glued together and then coated with a marine-grade resin from...