i'm going to ramble on a bit here, stick with me if you can offer advice or tips please.
I have 3yrs ago built from scratch a 16x8 garden shed and that one I put ex council paving slabs down on a geomembrane, then concrete blocks to level the sloping site. I had a fair bit of well seasoned 4x4 timber which I used to make a base frame resting on the blocks then I put 18mm ply sheets down on the timber to make a sound base to work from.
View media item 8545 View media item 8546 View media item 8547 View media item 8548
12mm ply for the back and sides, osb for the roof, made my own doors and clad the front. I only got 2/3 of the shed as the kids wanted a play room, hence the 2 doors. The final materials bill was around £700, I was surprised how quickly it mounted up and how little room I had for myself.
So I have been looking to build another larger one just for me!
The local workshop supply companies seem to be having a hard time and are doing 20% discount meaning I can pick up a 20x12 workshop made with good materials for under £1500 supplied and fitted to my base work, bearing in mind the time end effort it took me last time this seems like a deal I shouldnt miss.
The area of garden I want to put this new workshop onto is not flat, there is a change of level in both directions. Concrete base is a non starter as its 180ft to the road from the site making the cost just too high for me.
I have stacked at the end of the garden a huge supply of 2" blue band galvanised gas pipe and a large selection of 2" Tube clamps like these.
View media item 8557 View media item 8556 View media item 8555
My garden is heavy clay about 1 spit down and my intention was to lay around 16 council 2" paving slabs level on the clay with tube clamp base plates sat on them, A vertical length of 2" tube to level and a horizontal frame of tube joined with 4 way crosses to make an extremely strong free of cost base that I can easily adjust to get level while building it.
This kit is sitting doing nothing now having been part of a very large climbing frame and swing area I built when the kids were smaller so I would like to use it.
I have some treated 4x2 timber which I would then lay on top of the raised tube bed which would end up looking something like the frame base from the picture above, just a bit bigger!
I am btw happy to have a workshop thats likely due to levels be around 12" off the ground at the doorway.
Now the workshop does come with a base/floor thats 19mm T&G boards on 38x75mm floor joists at 600mm centers which I could get them to place directly onto my 4x2" frame.
But...I do happen to have a pile of 2 and 3mm 8x4ft sheets of alloy 5 bar treadplate tucked away up the garden.
View media item 8563
I was considering using these sheets for a workshop floor, screwing it down directly onto my 4x2" base frame and getting the fitters to build the workshop directly onto this saving me the cost of their supplied base/floor but I wonder if it will make the workshop a bit cold and maybe prone to a damp floor due to temperature changes?
If anyones got this far wadya fink?
I have 3yrs ago built from scratch a 16x8 garden shed and that one I put ex council paving slabs down on a geomembrane, then concrete blocks to level the sloping site. I had a fair bit of well seasoned 4x4 timber which I used to make a base frame resting on the blocks then I put 18mm ply sheets down on the timber to make a sound base to work from.
View media item 8545 View media item 8546 View media item 8547 View media item 8548
12mm ply for the back and sides, osb for the roof, made my own doors and clad the front. I only got 2/3 of the shed as the kids wanted a play room, hence the 2 doors. The final materials bill was around £700, I was surprised how quickly it mounted up and how little room I had for myself.
So I have been looking to build another larger one just for me!
The local workshop supply companies seem to be having a hard time and are doing 20% discount meaning I can pick up a 20x12 workshop made with good materials for under £1500 supplied and fitted to my base work, bearing in mind the time end effort it took me last time this seems like a deal I shouldnt miss.
The area of garden I want to put this new workshop onto is not flat, there is a change of level in both directions. Concrete base is a non starter as its 180ft to the road from the site making the cost just too high for me.
I have stacked at the end of the garden a huge supply of 2" blue band galvanised gas pipe and a large selection of 2" Tube clamps like these.
View media item 8557 View media item 8556 View media item 8555
My garden is heavy clay about 1 spit down and my intention was to lay around 16 council 2" paving slabs level on the clay with tube clamp base plates sat on them, A vertical length of 2" tube to level and a horizontal frame of tube joined with 4 way crosses to make an extremely strong free of cost base that I can easily adjust to get level while building it.
This kit is sitting doing nothing now having been part of a very large climbing frame and swing area I built when the kids were smaller so I would like to use it.
I have some treated 4x2 timber which I would then lay on top of the raised tube bed which would end up looking something like the frame base from the picture above, just a bit bigger!
I am btw happy to have a workshop thats likely due to levels be around 12" off the ground at the doorway.
Now the workshop does come with a base/floor thats 19mm T&G boards on 38x75mm floor joists at 600mm centers which I could get them to place directly onto my 4x2" frame.
But...I do happen to have a pile of 2 and 3mm 8x4ft sheets of alloy 5 bar treadplate tucked away up the garden.
View media item 8563
I was considering using these sheets for a workshop floor, screwing it down directly onto my 4x2" base frame and getting the fitters to build the workshop directly onto this saving me the cost of their supplied base/floor but I wonder if it will make the workshop a bit cold and maybe prone to a damp floor due to temperature changes?
If anyones got this far wadya fink?