3 inch Cast iron to plastic

[CPerth]

Hi There ,
Managed to open up and fix a collapsed 1900's drain , thanks to this forum and YouTube ( clay pipe in 2 foot of concrete would have cost a fortune and has multiple no shows anyway )


Anyway, Addition to the sewer is a run from the washing machine , it goes into a cast iron gutter pipe that's 3 inches ( just under )

This appears to be too small for any of the connectors In can find in the big stores / jewsons etc , for the other parts I used icon, Flo plast etc, but all too big for the small diameter of the cast iron down pipe

Perhaps I'm looking in the wrong places for a connector ? Ideally I want to buy in person , or is there a work around ?

So looking for a connector for a 3 inch down cast iron - to plastic

Thanks in advance

 

[HERTS P&D]

Any pictures?

Andy

 

[CPerth]

Attached, first one is the cast iron that to switch to regular pvc underground

 

[HERTS P&D]

Would this work?

https://www.drainagecentral.co.uk/F...d1XwXH_GTHHPGDfIeFvYtvZSK8HiPhl4aAmAwEALw_wcB

Andy

 

[CPerth]

One side yes, it would attach well to the cast iron , but the other side is the standard underground PVC (110 ish)

Must be missing something , and the pvc to clay ( 4 inch ) really common ...

 

[HERTS P&D]

Any good?

https://www.drainagesuperstore.co.u...3_1652635432_d57d147f2a810c3c66c1c836899715e1

Andy

 

[CPerth]

Superb yes , essentially what I'm after .

I'll either order that ( Shipping not cheap ) or v similar , just glad it exists . Looks like I'll have to get it to go into regular pile then a rest bend but either way it's good .


Any idea why 3 inch Cast iron to pvc a bit rare ? 4 Inch obviously much more common - shame need to order online and risk incorrect etc

Thanks again

 

[HERTS P&D]

Or even this one?

https://www.amazon.co.uk/Flexseal-F...x=75mm+-+110mm+rubber+coupling,aps,54&sr=8-15

Andy