- Joined
- 26 Nov 2018
- Messages
- 6
- Reaction score
- 0
- Country
Good evening...
I have a problem with my system and wonder if you could help ?
I have a system boiler installed relitvy new boiler showing no error codes.
When i click hot water on postion on the electronic pad underneath the boiler doesnt fire up to turn the hot water on.
it stays idle.
There are no problems when i switch the heating on , it fires up and all the radiators work as they shud do.
Whilst the heating is on i click the hot water on and the boiler then shuts down back to idle mode.
As soon as i switch the hot water off then the boiler comes back on for the central heating.
The arm on the motor isnt loose it has to be forced back too be locked into the barb... then when i click the hot water on the electronic pad it winds back to the auto position
Any ideas / advice you could please help me with ?? from what iv read it could be a faulty 3 port valve but oviously i need to get someone out to find where the problem is just looking for advice so i know what im on about when gettin someone here
I can get hot water by using the seperate electrical switch to heat the water and iv opened the valve to manual on the 3 port valve for when the heatings on.
Many thanks
I have a problem with my system and wonder if you could help ?
I have a system boiler installed relitvy new boiler showing no error codes.
When i click hot water on postion on the electronic pad underneath the boiler doesnt fire up to turn the hot water on.
it stays idle.
There are no problems when i switch the heating on , it fires up and all the radiators work as they shud do.
Whilst the heating is on i click the hot water on and the boiler then shuts down back to idle mode.
As soon as i switch the hot water off then the boiler comes back on for the central heating.
The arm on the motor isnt loose it has to be forced back too be locked into the barb... then when i click the hot water on the electronic pad it winds back to the auto position
Any ideas / advice you could please help me with ?? from what iv read it could be a faulty 3 port valve but oviously i need to get someone out to find where the problem is just looking for advice so i know what im on about when gettin someone here
I can get hot water by using the seperate electrical switch to heat the water and iv opened the valve to manual on the 3 port valve for when the heatings on.
Many thanks