- Joined
- 15 Sep 2004
- Messages
- 9
- Reaction score
- 0
- Country
Our G3 Mini went off the other morning (while unset). We entered the user code to silence it. The TA light is still flashing on the remote keypad.
I'm planning to open the panel and start by replacing the battery (which I expect is about 7 years old).
Will the alarm go off again if I do this?
Will the user code silence it?
Should I turn off the mains power to do this? - I'm aware there are mains voltages there and can be careful!!
I also notice that the power led is very dim on the main panel ... not sure if it was always like this.
Thanks.
I'm planning to open the panel and start by replacing the battery (which I expect is about 7 years old).
Will the alarm go off again if I do this?
Will the user code silence it?
Should I turn off the mains power to do this? - I'm aware there are mains voltages there and can be careful!!
I also notice that the power led is very dim on the main panel ... not sure if it was always like this.
Thanks.