I'd really appreciate some advice here. I have a damp problem in the upstairs bedroom of my 1881 Victorian mid terrace house. Having redecorated, I realised I had a repetitive damp area on the inside of the weather wall so I hacked back the very damp, crumbly old plaster and fill (more like soil!)to the brick work, which is quite wet at about 5 - 6 feet above floor level. Will this be the inner layer of a double cavity wall or is this THE wall? There appears to be a tiny damp patch just where the wall meets the ceiling above and to the left, although I had the roof repaired last year after some little toerag nicked all my lead flashing, so i'm wondering if the damp is more likely to be penetrating from outside? The exterior wall is rendered (sort of pebble dash) and painted so it's impossible to tell what's going on underneath. No cracks evident. It looks in good nick.
Am I best stripping back the whole wall, waiting for the brick to dry out (will it ever? and how long might that take?)and then applying some kind of waterproof sealant or membrane (Oldroyd 'P' Plaster Membrane anybody?!) followed by replastering or plaster board? Or will this just cover up the problem without dealing with it?
All help greatly appreciated!
Am I best stripping back the whole wall, waiting for the brick to dry out (will it ever? and how long might that take?)and then applying some kind of waterproof sealant or membrane (Oldroyd 'P' Plaster Membrane anybody?!) followed by replastering or plaster board? Or will this just cover up the problem without dealing with it?
All help greatly appreciated!