I have a largish open (as in it has a header tank in the loft ie is not a closed system) central heating system, I am guessing about 30 years old. The boiler is newer, a gas fired condensing boiler about 8 years old. The new boiler was fitted with a bypass, which the original system did not have. There are 2 "circuits", heating and hot water.
The boiler has 2 thermostat controls, one for heating, one for water. It has one hot outlet. This routes to a valve, electricly connected to a dual (ie water and heating) timer. From the valve run the separate heating and water "circuits". I believe this is all pretty conventional.
The bathroom radiator is on the hot water circuit. This means the bathroom is only heated whilst hot water is being heated. So the bathroom often gets cold 'cos after the water tank has heated up, that circuit turns off.
This radiator is connected across the flow and return pipes at a position right next to the flow and return pipes for the heating circuit. I would like to move it on to the heating circuit - not that difficult a copper pipework job.
But I'm wondering why it was connected up this way in the first place and whether there would be any problems caused by removing the one radiator on this circuit and leaving the water tank there on its own.
The boiler has 2 thermostat controls, one for heating, one for water. It has one hot outlet. This routes to a valve, electricly connected to a dual (ie water and heating) timer. From the valve run the separate heating and water "circuits". I believe this is all pretty conventional.
The bathroom radiator is on the hot water circuit. This means the bathroom is only heated whilst hot water is being heated. So the bathroom often gets cold 'cos after the water tank has heated up, that circuit turns off.
This radiator is connected across the flow and return pipes at a position right next to the flow and return pipes for the heating circuit. I would like to move it on to the heating circuit - not that difficult a copper pipework job.
But I'm wondering why it was connected up this way in the first place and whether there would be any problems caused by removing the one radiator on this circuit and leaving the water tank there on its own.