Morning all,
Looked on the forum and there are ALOT of different ways to attach insulation to internal walls. Bit confused
Want to apply celotex 50mm insulation to 3 internal walls.
stick celotex direct to wall - 12.5mm plasterboard - nail-able plugs.
stick celotex to wall- 25mmx50mm battens ontop- vapour barrier- 12.5mm plasterboard all secured with nail-able screws.
Obviously could get the insulated celotex plasterboards and bond straight onto wall but cost wise would rather avoid.
Due to increased wall depth would dig out existing electrics and extend in conduit as read insulation can interfere with the cable and finish in dryline electric box.
Thanks for taking the time to give advise.
Looked on the forum and there are ALOT of different ways to attach insulation to internal walls. Bit confused
Want to apply celotex 50mm insulation to 3 internal walls.
stick celotex direct to wall - 12.5mm plasterboard - nail-able plugs.
stick celotex to wall- 25mmx50mm battens ontop- vapour barrier- 12.5mm plasterboard all secured with nail-able screws.
Obviously could get the insulated celotex plasterboards and bond straight onto wall but cost wise would rather avoid.
Due to increased wall depth would dig out existing electrics and extend in conduit as read insulation can interfere with the cable and finish in dryline electric box.
Thanks for taking the time to give advise.
