Hi,
I have 3x LV down-lighters in my bathroom, my ceiling is 2400mm high - so from what I can see this makes them neither zone 1 or 2, so they need not be special fittings - please correct me otherwise.
I am installing a Zone 1 LV fan right above the shower, I assume if the 240 supply and transformer are in the roof void above that is OK.
I am installing a loft, 100mm rockwool is being laid in chicken wire for Fire Regs, I am told I need fire hoods on the down-lighters - could I create these with plasterboard (75mm gap above, 100mm all around) ? Regarding the transformer could this just be screwed somewhere above the mineral wool - I assume some sort of access through the floor would be required if it ever went wrong.
Thanks
I have 3x LV down-lighters in my bathroom, my ceiling is 2400mm high - so from what I can see this makes them neither zone 1 or 2, so they need not be special fittings - please correct me otherwise.
I am installing a Zone 1 LV fan right above the shower, I assume if the 240 supply and transformer are in the roof void above that is OK.
I am installing a loft, 100mm rockwool is being laid in chicken wire for Fire Regs, I am told I need fire hoods on the down-lighters - could I create these with plasterboard (75mm gap above, 100mm all around) ? Regarding the transformer could this just be screwed somewhere above the mineral wool - I assume some sort of access through the floor would be required if it ever went wrong.
Thanks