Hi All
I need to change my brake booster on my Nissan serena 2.0 SLX as the diaphragm is not functioning properly as a hissing noise is heard when I depress the brake pedal, I cannot see any damage or leaks on the hoses and was wondering if anyone has done this procedure before.
Do I simply undo the bolts holding the master cylinder to the servo without disrupting the brake lines, hence not needing to bleed the system and then disconnect clevis pin and pedal and then undo four bolts which support the booster from inside the vehicle.
Any information would be truly appreciated.
I need to change my brake booster on my Nissan serena 2.0 SLX as the diaphragm is not functioning properly as a hissing noise is heard when I depress the brake pedal, I cannot see any damage or leaks on the hoses and was wondering if anyone has done this procedure before.
Do I simply undo the bolts holding the master cylinder to the servo without disrupting the brake lines, hence not needing to bleed the system and then disconnect clevis pin and pedal and then undo four bolts which support the booster from inside the vehicle.
Any information would be truly appreciated.