Hi All,
We have a combi boiler for about 1.5 years now with no issues but now it is not heating the water at all. I noticed the the pressure gauge is at 0, when i switch power off and on again the pressure goes up to about 0.8 bar but then drops to 0. I read that combi's will not work if pressure not correct which I would guess would be about 1.
I have lots of valves underneath one marked "pressure Gauge" and one marked " filing loop" if I turn the filing loop nothing happens to the pressure and I can't seem to turn the pressure gauge one. There are about 3 other valves not marked and one is close to the filing loop one.
Any ideas how I get my pressure back up? Picture attached via google drive.
https://drive.google.com/open?id=0B5FZStiNCjKzRkczcWRtV2hxRXM
Thanks
We have a combi boiler for about 1.5 years now with no issues but now it is not heating the water at all. I noticed the the pressure gauge is at 0, when i switch power off and on again the pressure goes up to about 0.8 bar but then drops to 0. I read that combi's will not work if pressure not correct which I would guess would be about 1.
I have lots of valves underneath one marked "pressure Gauge" and one marked " filing loop" if I turn the filing loop nothing happens to the pressure and I can't seem to turn the pressure gauge one. There are about 3 other valves not marked and one is close to the filing loop one.
Any ideas how I get my pressure back up? Picture attached via google drive.
https://drive.google.com/open?id=0B5FZStiNCjKzRkczcWRtV2hxRXM
Thanks