- Joined
- 31 May 2015
- Messages
- 3
- Reaction score
- 0
- Country
Hi
I removed the radiator from our combi system to have the wall plastered behind. The system was then filled and radiators bled.
The water pressure was raised the the system to 1.2 bar using the filling loop which was then removed. Switched the system on to test and all radiators got hot and the system pressure went up to 2.5 bar
Checked this morning and the pressure is sat at 1.5 bar, 0.3 higher than the cold pressure which I set yesterday.
Any ideas!?
I removed the radiator from our combi system to have the wall plastered behind. The system was then filled and radiators bled.
The water pressure was raised the the system to 1.2 bar using the filling loop which was then removed. Switched the system on to test and all radiators got hot and the system pressure went up to 2.5 bar
Checked this morning and the pressure is sat at 1.5 bar, 0.3 higher than the cold pressure which I set yesterday.
Any ideas!?