Hi all, installing a dishwasher, can someone please advise on where the pipes should go into this system?
dishwasher install
Dishwasher install question
- Thread starter cawright1
- Start date
Sponsored Links
- Joined
- 31 Mar 2013
- Messages
- 501
- Reaction score
- 47
- Country
Cor that looks a mess.
Doesn't look as though there is anywhere for the waste to go as it's all taken.
Doesn't look as though there is anywhere for the waste to go as it's all taken.
There are already 2x appliance waste pipes connected there (the grey corrugated ones), typically it would be one for a dishwasher and another for a washing machine.
Do you already have a dishwasher you are replacing, or is this a totally new one?
Water inlet is to a connector similar to what's already there with the small blue handle.
If you need another one, it could be added fairly easily to the short horizontal pipe on the right side.
Do you already have a dishwasher you are replacing, or is this a totally new one?
Water inlet is to a connector similar to what's already there with the small blue handle.
If you need another one, it could be added fairly easily to the short horizontal pipe on the right side.
Thanks. It's not mine, I was just sent the pic. There is only a washing machine there at the moment so the other waste must be spare. So, how do I connect the horizontal pipe to the dishwasher inlet pipe?
Sponsored Links
You need to add a washing machine tap ( same as blue one in photo) to the spur to right which has been capped off .
If you have limited diy skills you can use a push on variety . Isolate water , remove cap by pushing in rim to release and push on new tap .
www.screwfix.com
If you have limited diy skills you can use a push on variety . Isolate water , remove cap by pushing in rim to release and push on new tap .
Flomasta Push-Fit Washing Machine Valve 15mm x 3/4" - Screwfix
Order online at Screwfix.com. Lightweight fittings with strong grip.One-step, fully demountable and reusable. Combining push-fit and twist-locking technology to offer a secure, leak-free joint which incorporates pressure and combination systems. Suitable for plumbing and local / home hot water...
That's wonderful. Very much appreciate your help, thanks.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
