I have a bnq it kitchen and am assembling a 600mm unit with 3 drawers in.
I have put the drawers in place and fixed 2 fronts into position, the top one seems to have gone in perfect but the middle one is dropping to the right hand side.
If anyone could tell me an easy solution I would be very appreciative.
Im assuming the right hand runner must be slightly lower than the one on the left, I measured it all with a metal ruler as I wanted it to be spot on but I guess I went wrong somewhere down the line.
I paid for the soft closing runners and the right one does not seem to be as rigid as the left is this something that could be wrong or am I reading too much into this? thanks for any help, kind regards Paul...
I have put the drawers in place and fixed 2 fronts into position, the top one seems to have gone in perfect but the middle one is dropping to the right hand side.
If anyone could tell me an easy solution I would be very appreciative.
Im assuming the right hand runner must be slightly lower than the one on the left, I measured it all with a metal ruler as I wanted it to be spot on but I guess I went wrong somewhere down the line.
I paid for the soft closing runners and the right one does not seem to be as rigid as the left is this something that could be wrong or am I reading too much into this? thanks for any help, kind regards Paul...