I'm new to this forum and looking for a bit of advice.
I've just replaced my old stand alone gas cooker for a electric cooker and separate gas hob. I have a connector unit just below waist level already on the wall.
Can I connect my oven and gas hob electrical supply through the same connector unit, or do I need a seperate outlet for the gas hob (instructions say to wire through double pole fused spur outlet). The oven instructions say I need a control unit rating of 20 amps, the hob says 3amps.
Also, it say on the oven instructions that the connector unit must not be more than 30cm above the base of the oven recess. Mine is about 50cm. Do I need to move it or will it be ok where it is?
Some advice would be appreciated.
Cheers
I've just replaced my old stand alone gas cooker for a electric cooker and separate gas hob. I have a connector unit just below waist level already on the wall.
Can I connect my oven and gas hob electrical supply through the same connector unit, or do I need a seperate outlet for the gas hob (instructions say to wire through double pole fused spur outlet). The oven instructions say I need a control unit rating of 20 amps, the hob says 3amps.
Also, it say on the oven instructions that the connector unit must not be more than 30cm above the base of the oven recess. Mine is about 50cm. Do I need to move it or will it be ok where it is?
Some advice would be appreciated.
Cheers