Soft water area. Stopcock fully open, water pressure is high. New hose and shower head, cleaned and checked for blockage.
My Triton Opal II has been progressively more intermittent in heating.
It always has been less effective in the winter, but now is barely heating.
When operated on the High II setting, low pressure light comes on and flickers.
If you're lucky, this dims a bit and the High setting slowly comes to life with some warm water.
Dial is normally at about the 1 o'clock position, but varying it has little effect except when turning it lower (anticlockwise) there is no heat at all.
TCO, Outlet, Tank, checked for continuity with multimeter OK, solenoid checked for resistance and at 3.7.
Tank elements (Red to Blue) show resistance of about 11.5.
No sign of any burning or damage.
Any suggestions please?
My Triton Opal II has been progressively more intermittent in heating.
It always has been less effective in the winter, but now is barely heating.
When operated on the High II setting, low pressure light comes on and flickers.
If you're lucky, this dims a bit and the High setting slowly comes to life with some warm water.
Dial is normally at about the 1 o'clock position, but varying it has little effect except when turning it lower (anticlockwise) there is no heat at all.
TCO, Outlet, Tank, checked for continuity with multimeter OK, solenoid checked for resistance and at 3.7.
Tank elements (Red to Blue) show resistance of about 11.5.
No sign of any burning or damage.
Any suggestions please?