Hey guys...I've run into a problem with regards to moving my toilet in a downstairs bathroom.
I was going to dig out the existing soil pipe, cut back and couple a straight piece on to the existing in order to move the loo. Unfortunately the pipe is too close to the wall and I can't cut it back to before the 90deg bend. Would it be a problem if I added another 90deg bend, creating a s bend? There is enough depth to do this in the floor (to allow for pipe and fall etc). See badly drawn pic below - the section in the green box is the existing pipework
Any advice is appreciated!
I was going to dig out the existing soil pipe, cut back and couple a straight piece on to the existing in order to move the loo. Unfortunately the pipe is too close to the wall and I can't cut it back to before the 90deg bend. Would it be a problem if I added another 90deg bend, creating a s bend? There is enough depth to do this in the floor (to allow for pipe and fall etc). See badly drawn pic below - the section in the green box is the existing pipework
Any advice is appreciated!