FAS extractor fan wiring

snail85 · 27 Sep 2007

I have just bought a FAS TP 100 extractor fan and need some help with the wiring. I'm wiring it to a plug but I'm not sure what rating of flex and fuse to buy. The power of the fan is 65 W so I'm thinking 3 amp flex and fuse would be ok? Here's the wiring diagram I take it I just connect the wires Earth, Live and Neutral from the plug to the corresponding terminals as shown in the diagram, then I should be good to go?

breezer · 27 Sep 2007

a fan is not really an appliance is it

trap0001 · 27 Sep 2007

3A fuse with 0.75-1.0mm flex will be fine.

Taylortwocities · 27 Sep 2007

breezer said:
a fan is not really an appliance is it

You'd think not wouldnt you. Yesterday I went to do a PAT test for a rental property (yawn). They had asked for the bathroom extractor fan to be PAT tested.

Earth bond - no -its double insulated
Plug & lead - no - its direct wired in
Insulation test - no - dont want to fry the timer!

diynot

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.

Are you a trade or supplier? You can create your listing free at DIYnot Local

FAS extractor fan wiring

snail85

breezer

trap0001

Taylortwocities

DIYnot Local

Similar threads