Ferroli FER Falcon II fault

Joined
3 Jan 2007
Messages
1
Reaction score
0
Country
United Kingdom
The boiler has been installed for approx 5yrs and I am currently experiencing an intermittent problem with CH. Boiler supply pressure 1.2 bar, operating pressure 1.8 bar.

The boiler fires up in CH mode and shuts down after approx 30 seconds. If during this interval DHW is demanded the boiler runs correctly however HW is excessively hot for a short period, approx 5 secs. An audible click is evident when HW is demanded.

If HW is not demanded the boiler continues to cycle at this interval.

DHW operation is correct.

As mentioned this is currently an intermittent problem however is becoming more frequent.

Thank you for any advice in advance
 
Sponsored Links

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top