Fitting Dishwasher to existing washine machine but no sink

[Shepherdfans]

Any help on this would be appreciated. We are fitting a second mini kitchen comprising (from right to left) a washing machine, dishwasher, fridge and cupboards but no kitchen sink. The washing machine is already plumbed in and working fine. When we went to our local large hardware store the only joint water outlet we could buy was one which attached to waste under sink which obviously won't work without the sink.

We have bought a Y inlet water pipe which we hope will do the job for incoming water, but we can't find anything suitable for the dishwasher waste to go into the washing machine waste that doesn't include the pipe at the top to attach to the kitchen sink waste.

Hope this makes sense and any help would be appreciated.

 

[Diyisfun]

Is the washing machine emptying into a stand pipe (it should be), then it will be simple to make a 2nd stand pipe for the dishwasher (as long as the pipe run is not to long.

 

[Shepherdfans]

Thanks for quick reply. Not sure what you meant about fitting another standpipe (very much an amateur diy'er) I have though ordered a
'Twin Adaptor - Connect 2 of your appliances to one waste pipe'
from Amazon and keeping fingers crossed it will work.

 

[jj4091]

I presume your dishwasher has the same size drain hose as your washer, so you should be able to fit one of these http://www.screwfix.com/p/washing-machine-drain-out-kit/75883 to your existing waste pipe that the washer drain hose feeds into.